Sort by:

Price

Stores

Shopping Places

United States

Showing 1 to 10 of 182 products
Whirlwind Medusa Multitrack 4 XLR Female Fan to 4 XLR Male Fan Snake Cable, 25' -

Whirlwind Medusa Multitrack 4 XLR Female Fan to 4 XLR Male Fan Snake Cable, 25' Length

The Medusa Multitrack (MT) Series is designed to interface multitrack recorders or outboard equipment to mixing consoles. Each Multitrack Medusa is constructed of Whirlwind multipair cable with a heat-shrunk fanout at each end, and is available with optional Snakeskin® for an extra charge. An alternative construction uses individually jacketed (IJ) Canare wire with Snakeskin® fanouts standard. Each fanout can be specified with distinct connector types and signal polarity. When the same type of connector is specified at each end, wiring is pin to pin. Wire mesh hanger grips can be ordered as an option.
Whirlwind Audio Multitrack Snake, 6 XLRM to 6 TRSM, 25', Fan to -

Whirlwind Audio Multitrack Snake, 6 XLRM to 6 TRSM, 25', Fan to Fan

The Medusa Multitrack (MT) Series is designed to interface multitrack recorders or outboard equipment to mixing consoles. Each Multitrack Medusa is constructed of Whirlwind multipair cable with a heat-shrunk fanout at each end, and is available with optional Snakeskin® for an extra charge. An alternative construction uses individually jacketed (IJ) Canare wire with Snakeskin® fanouts standard. Each fanout can be specified with distinct connector types and signal polarity. When the same type of connector is specified at each end, wiring is pin to pin. Wire mesh hanger grips can be ordered as an option.
Whirlwind Medusa Multitrack 4 XLR Female Fan to 4 XLR Male Fan Snake Cable, 50' -

Whirlwind Medusa Multitrack 4 XLR Female Fan to 4 XLR Male Fan Snake Cable, 50' Length

The Whirlwind Medusa Multitrack Snake Cable is designed from the ground up for durability, ease-of-use and to sound great. This snake is 50' long with 4 XLR Female connectors fanned out at one end and 4 XLR Male connectors fanned out at the other. Numbers are clearly labeled with easy-to-read graphics engraved into the metal on each connector. A laser engraving process is used that heats up the surface below the finish, so the labeling can't wear off. It is constructed with Whirlwind multipair cable with a heat-shrunk fanout at each end. Reliable Construction Rugged heat shrink is applied throughout the snake and double layered at the most critical points. Easy Organization Each custom Whirlwind connector features laser engraved and printed numbers.
Whirlwind Audio Multitrack Snake, 4 XLRF to 4 XLRM, 10', Fan to -

Whirlwind Audio Multitrack Snake, 4 XLRF to 4 XLRM, 10', Fan to Fan

The Medusa Multitrack (MT) Series is designed to interface multitrack recorders or outboard equipment to mixing consoles. Each Multitrack Medusa is constructed of Whirlwind multipair cable with a heat-shrunk fanout at each end, and is available with optional Snakeskin® for an extra charge. An alternative construction uses individually jacketed (IJ) Canare wire with Snakeskin® fanouts standard. Each fanout can be specified with distinct connector types and signal polarity. When the same type of connector is specified at each end, wiring is pin to pin. Wire mesh hanger grips can be ordered as an option.
Whirlwind Medusa Multitrack Series 25' 6 Channel 3-Pin XLR Male to XLR Female Fanout Snake -

Whirlwind Medusa Multitrack Series 25' 6 Channel 3-Pin XLR Male to XLR Female Fanout Snake Cable

The Medusa Multitrack (MT) Series is designed to interface multitrack recorders or outboard equipment to mixing consoles. Each Multitrack Medusa is constructed of Whirlwind multipair cable with a heat-shrunk fanout at each end, and is available with optional Snakeskin® for an extra charge. An alternative construction uses individually jacketed (IJ) Canare wire with Snakeskin® fanouts standard. Each fanout can be specified with distinct connector types and signal polarity. When the same type of connector is specified at each end, wiring is pin to pin. Wire mesh hanger grips can be ordered as an option.
Whirlwind Audio Multitrack Snake, 4 TRSM to 4 TRSM, 10', Fan to -

Whirlwind Audio Multitrack Snake, 4 TRSM to 4 TRSM, 10', Fan to Fan

The Medusa Multitrack (MT) Series is designed to interface multitrack recorders or outboard equipment to mixing consoles. Each Multitrack Medusa is constructed of Whirlwind multipair cable with a heat-shrunk fanout at each end, and is available with optional Snakeskin® for an extra charge. An alternative construction uses individually jacketed (IJ) Canare wire with Snakeskin® fanouts standard. Each fanout can be specified with distinct connector types and signal polarity. When the same type of connector is specified at each end, wiring is pin to pin. Wire mesh hanger grips can be ordered as an option.
Whirlwind 50' Box to Fan Medusa Power 2 Speaker Line Snake Cable, 12 XLR Inputs, 4 1/4

Whirlwind 50' Box to Fan Medusa Power 2 Speaker Line Snake Cable, 12 XLR Inputs, 4 1/4" TRS Returns

The Whirlwind 50' Box to Fan Medusa Power 2 Speaker Line Snake Cable has 12 XLR Inputs and 4 1/4" TRS Return connectors. It is designed specifically for use with mixing boards that incorporate built-in power amplifiers. This multipair cable is a cable within a cable - the outer layer contains audio pairs surrounding an inner core of 2 pairs of 14 ga. wire that has its own overall foil shield and jacket. Each of the two speaker lines is terminated with 2 paralleled 1/4" jacks on the box. A heavy-duty wire mesh strain relief secures the multipair cable to the box and a wire mesh hanger grip is provided at the fanout.Whirlwind is often asked about the advisability of running speaker level signals in the same cable as mic level signals - the concern being possible crosstalk from the speaker lines into the mic lines. Whirlwind pioneered the Medusa Power Series snake and has been producing it for over 30 years. In all that time, Whirlwind have never encountered an issue with crosstalk caused by the snake. The Medusa Power snake was designed so that the geometry of the cable creates physical distance between the separate sections, guarding against crosstalk.There are other issues regarding power loss and damping factor that can come into play when running speaker lines long distances bu...
Whirlwind Audio Multitrack Snake, 24 XLRF to 24 XLRM, 15', Fan to -

Whirlwind Audio Multitrack Snake, 24 XLRF to 24 XLRM, 15', Fan to Fan

The Medusa Multitrack (MT) Series is designed to interface multitrack recorders or outboard equipment to mixing consoles. Each Multitrack Medusa is constructed of Whirlwind multipair cable with a heat-shrunk fanout at each end, and is available with optional Snakeskin® for an extra charge. An alternative construction uses individually jacketed (IJ) Canare wire with Snakeskin® fanouts standard. Each fanout can be specified with distinct connector types and signal polarity. When the same type of connector is specified at each end, wiring is pin to pin. Wire mesh hanger grips can be ordered as an option.
Whirlwind ME-12-M-NR-050 MINI 12 ELITE Snake, Low Profile, 12 XLR Inputs, No Returns, 50 -

Whirlwind ME-12-M-NR-050 MINI 12 ELITE Snake, Low Profile, 12 XLR Inputs, No Returns, 50 Feet

Whirlwind's Medusa Elite Snakes are an evolution of our world famous Standard series. They're still made here at our Rochester, NY factory.
Whirlwind Medusa Standard Series MS-16-8-XL 100' Audio Snake Cable, 16 XLR Inputs, 8 Returns, XLR Return -

Whirlwind Medusa Standard Series MS-16-8-XL 100' Audio Snake Cable, 16 XLR Inputs, 8 Returns, XLR Return Connectors

Whirlwind's Medusa Series Snakes have been the touring standard worldwide for decades. They're still made here at their Rochester NY factory. Heavy duty powder coated steel stagebox with Whirlwind connectors and integrated handle Whirlwind by Belden NEC CM rated multipair cable, heavy duty, flexible, multipair cable. Each pair contains two twisted 24GA 7x32 polyethylene insulated conductors with 100% foil shield and 24GA drain wire Fanouts with multiple layers of rugged heat shrink at the most critical points Fanouts feature Whirlwind connectors with engraved numbers and letters Genuine Kellems wire mesh hanger to support the fan-out at the board. Genuine Kellems strain relief and grip with internal cable clampStandard fan-out lengths are: 3 ft. - up to 28 channels 4 ft. - 28 channels and upOptional SnakeSkin is available for the ultimate in fan-out protection (for an extra charge). Medusas are also available with integrated cable reel.
Lasko 20
Whirlwind Fan

Lasko 20" High Velocity Floor or Wall Mount 3-Speed Fan, Model #2265QM

Lasko 16
Whirlwind Fan

Lasko 16" Oscillating Pedestal Stand 3-Speed Fan, Model #S16500, Black

Lasko Wind Curve Tower Fan with Nighttime Setting, - Whirlwind Fan
Whirlwind Fan

Lasko Wind Curve Tower Fan with Nighttime Setting, Gray/Woodgrain

Lasko Cool Colors 20
Whirlwind Fan

Lasko Cool Colors 20" Box 3-Speed Fan, Model #B20301, Black

Lasko 20
Whirlwind Fan

Lasko 20" Box 3-Speed Fan, Model #B20200, White

Whirlwind Fan: find, shop, buy, compare



Find the cheapest prices on Whirlwind Fan from certified, secure, trusted merchants, stores, and retailers at aDealaLot.com. Compare the cheapest prices from across the internet in seconds and save time and money. Shopping the internet for the best prices has never been so easy. Comparison shop trusted, certified merchants on secure websites from across the internet, and always find the best price. Find the total price from unbiased shopping merchants and read reviews on products and merchants.



Assembling a Pedestal Fan

Whirlwind Fan

Step by step instructions for assembling a Lasko Model 1827 pedestal fan.

Tags: fan,adjustable,Lasko,cooling,pedestal,oscillate...