Sort by:

Price

Stores

Shopping Places

United States

Showing 1 to 10 of 228 products
TB6600 4A 9-42V Stepper Motor Driver CNC Controller with Stepper Motor Nema 17 Bipolar 1.7A 40N.cm Holding Torque and Motor Mounting Bracket for 3D Printer Hobby CNC Router XYZ by -

TB6600 4A 9-42V Stepper Motor Driver CNC Controller with Stepper Motor Nema 17 Bipolar 1.7A 40N.cm Holding Torque and Motor Mounting Bracket for 3D Printer Hobby CNC Router XYZ by Beauty Star

(1) TB6600 Stepper Motor Driver: Single chip bipolar sine microstep stepper motor driver. New BiCD 0.13 nm process. Up to 42V. 5 subdivision mode options (1/1, 1/2, 1/4, 1/8, 1/16,1/32). Output current: IOUT = 4.0A (peak, in 100ms). rated output: IOUT = 3.5 A Resistance (a +) = 0.4 Alarm output pin current:Ialert = 1mA Monitoring output pin (MO): Imo= 1mA Break through the traditional, single power supply. Built in overheating protection (TSD) circuit. Undervoltage protection, built-in (UVLO) circuit. Built-in overcurrent detection (ISD), circuit. Can control 2 phase stepper motor forward and reverse rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode. (2) Nema 17 Stepper Motor: Motor type: Bipolar Stepper Phase Resistance: 1.5Ohm Phase Inductance: 2.8mH Detent Torque: 2.2N.cm Rotor Inertia: 54g.cm2 Holding Torque: 40N.cm Step angle: 1.8 deg Motor Weight: 280g Step angle accuracy: + - 5%(full step, not load) Resistance accuracy: + - 10% Inductance accuracy: + - 20% Temperature rise: 80deg Max(rated current, 2 phase on) Ambient temperature: -20deg ~+50deg Insulation resistance: 100MΩ Min, 500VDC Insultion Strength: 500VAC for one minute Connection: Red(A+), Green(A-), Yellow(B+), Blue(B-) Package Included: 1 x TB6600 Motor Driver 1 x Nema 17 Motor 1 x Mounting Bra...
STEPPERONLINE CNC Stepper Motor Driver 1.0-4.2A 20-50VDC 1/128 Micro-step Resolutions for Nema 17 and 23 Stepper -

STEPPERONLINE CNC Stepper Motor Driver 1.0-4.2A 20-50VDC 1/128 Micro-step Resolutions for Nema 17 and 23 Stepper Motor

Overview: This driver is an industrial-grade fully digital stepper drive developed with advanced DSP control algorithm based on the latest motion control technology. Its motor auto-identification and parameter auto-configuration feature offers quick setup to optimal modes with different motors. Compared with other analog or TB6600 chips driver, it can drive a stepper motor at much lower noise, lower heating, and smoother movement. Key Features: * Anti-Resonance provides optimal torque and nulls mid-range instability * Motor auto-identification and parameter auto-configuration when power on, offer optimal responses with different motors * Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement * 15 selectable microstep resolutions: 1/2, 1/4, 1/5, 1/8, 1/10, 1/16, 1/20, 1/25, 1/32, 1/40, 1/50, 1/64, 1/100, 1/125, 1/128 * Soft-start with no "jump" when powered on * 8 selectable peak current including 1.00A to 4.20A * Pulse input frequency up to 200 KHz, TTL compatible and optically isolated input * Automatic idle-current reduction * Suitable for 2-phase and 4-phase motors * Support PUL/DIR mode * Over-voltage and over-current protections Electrical Specifications: * Output Peak Current: 1.0~4.2A (3.0 RMS) * I...
MYSWEETY TB6600 4A 9-42V Stepper Motor Driver CNC Controller, Stepper Motor Driver Nema tb6600 Single Axes Hybrid Stepper Motor for -

MYSWEETY TB6600 4A 9-42V Stepper Motor Driver CNC Controller, Stepper Motor Driver Nema tb6600 Single Axes Hybrid Stepper Motor for CNC

Download the English manual : https://s3.us-east-2.amazonaws.com/stepper-motor-driver/TB6600/MYSWEETY+TB6600+Stepper+Motor.pdf Feature: PWM chopper type bipolar stepper motor driver IC 1. 9V-42V DC power supply 2. H bridge bipolar constant phase flow drive 3. the maximum 4.0A of the eight kinds of output current 4. the largest 32 subdivision of the 6 models are optional 5. input signal high speed photoelectric isolation 6. common-anodestandard single pulse interface 7. offline to maintain the function 8. semi closed enclosure can be adapted to a more stringent environment 9. to provide energy-saving semi-automatic current lock function 10. built-in temperature protection and over current protection. Can control 2 phase stepper motor forward and reverse rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode. Only the clock pulse signal can be driven two-phase bipolar stepper motor to achieve low vibration, high efficiency work. IC parameter: single chip bipolar sine microstep stepper motor driver the new BiCD 0.13 nm process up to 42V resistance (a +) = 0.4 ?the forward and reverse rotation control 5 subdivision mode options (1/1, 1/2, 1/4, 1/8, 1/16,1/32) output current: IOUT = 4.0A (peak, in 100ms) rated output: IOUT = 3.5 A package: HZIP25 - 1.00F input port internal...
Qunqi 4Packs L298N Dual H Bridge Stepper Motor Drive Controller Board Module for Arduino Smart -

Qunqi 4Packs L298N Dual H Bridge Stepper Motor Drive Controller Board Module for Arduino Smart Car

Specification: Chip: L298N Logic voltage: 5V Logic current 0mA-36mA Storage Temperature: -20 ℃ to ℃ to +135 Operating mode: H-bridge driver (dual) Drive voltage: 5V-35V Drive current: 2A (MAX single bridge) Maximum power: 25W Dimensions: 43x43x27mm Package include: 4x L298N Module Note: This module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply DO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available. When ENA enable IN1 IN2 control OUT1 OUT2 When ENB enable IN3 IN4 control OUT3 OUT4
Qunqi L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For -

Qunqi L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino

Specification: Chip: L298N Logic voltage: 5V Logic current 0mA-36mA Storage Temperature: -20 ℃ to ℃ to +135 Operating mode: H-bridge driver (dual) Drive voltage: 5V-35V Drive current: 2A (MAX single bridge) Maximum power: 25W Dimensions: 43x43x27mm Package include: 1x L298N Module Note: This module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply DO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available. When ENA enable IN1 IN2 control OUT1 OUT2 When ENB enable IN3 IN4 control OUT3 OUT4
Geckodrive G251X Micro Stepping Stepper Motor Driver | 50VDC 3.5A NEMA 17-34 | 2 Phase | Perfect for CNC, 3D Printing Machines | Made and Supported in the -

Geckodrive G251X Micro Stepping Stepper Motor Driver | 50VDC 3.5A NEMA 17-34 | 2 Phase | Perfect for CNC, 3D Printing Machines | Made and Supported in the USA

Designed to be a small stepper motor control with a high power density, the G251X excels at driving stepper motors from NEMA 17 to NEMA 34. Geckodrive offers quality and customer service unavailable from competing products. The voltage range of 15 - 50VDC ensures that it can drive most common motors without sacrificing speed, and its 5A peak current output means you don't have to sacrifice torque. Equipped with the same midband resonance compensation, low speed smoothness adjustment, and full step morphing as our larger drives allows the G251X to be an excellent motor control for mid-range stepper motors. The G251X can fit in most applications due to its small form-factor (1.675" x 1.56" x 0.585"), and its light weight (0.45 oz) makes it perfect for battery driven and mobile uses. End-users and OEMs alike prefer the 3.5mm 12-position terminal block that makes for quick wiring. OEM Discounts Please inquire directly at [email protected] for more information. FEATURES: 15-50VDC, 3.5 AMP NEMA 17 to NEMA 34 Proprietary anti resonance algorithms Midband resonance compensation Full step morphing to increase top end torque
WGCD 5 PCS L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper Module for -

WGCD 5 PCS L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper Module for Arduino

Specification: Name: Dual H bridge motor driver module Working mode: H bridge driver (dual) Main control chip: L298N Logic voltage: 5 v The driving voltage: 5 v - 35 v Logic current : 0mA-36mA Drive current: 2 a (MAX single bridge) Storage temperature: - 20 °C to + 135 °C Max power: 25 w Weight: 30 g Size: 43 * 43 * 27 mm L298N motor controller board module, ideal for Arduino smart car power UNO MEGA R3 Mega2560 Package included: 5 pcs L298N Motor Controller Board Module
TIMESETL 5Pack L298N Stepper Motor Driver Controller Board Dual H Bridge Module for Arduino Electric -

TIMESETL 5Pack L298N Stepper Motor Driver Controller Board Dual H Bridge Module for Arduino Electric Projects

L298N of TIMESETL TIMESETL Motor Drive Controller - High Quality Specification: Size: 43*43*27mm/ 1.69*1.69*1.06 inch Dual H bridge drive (can drive 2 DC motors) Chip: L298N Logical voltage: 5V Drive voltage: 5V-35V Logic current: 0mA-36mA Drive current: 2A(For each DC motor) Weight: 30g TIMESETL L298N DC Stepper Motor Drive - Usage Great for Arduino, Smart Car, Power UNO, MEGA R3, Mega 2560, etc If driving voltage is more than 12V, please use external 5volt logic outputs to switch the H-bridge circuits. Delivery 5 x L298N Stepper Motor Controller
Geckodrive G203V Digital Stepper Motor -

Geckodrive G203V Digital Stepper Motor Driver

The G203V is one of Geckodrive's toughest drives and was designed with the intention of creating an indestructible stepper controller. It has short circuit protection on the motor outputs, reversed power supply polarity protection, over-voltage and under-voltage protection and is internally fused. Where most other drives would be damaged or potentially destroyed the G203V will survive. Because of its CPLD architecture we can offer three different versions of the drive, all with the same level of protection.
Qunqi 2Packs L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For -

Qunqi 2Packs L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino

Specification: Chip: L298N Logic voltage: 5V Logic current 0mA-36mA Storage Temperature: -20 ℃ to ℃ to +135 Operating mode: H-bridge driver (dual) Drive voltage: 5V-35V Drive current: 2A (MAX single bridge) Maximum power: 25W Dimensions: 43x43x27mm Package include: 2x L298N Module Note: This module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply DO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available. When ENA enable IN1 IN2 control OUT1 OUT2 When ENB enable IN3 IN4 control OUT3 OUT4
Unique Bargains 20 Pcs 12mm x 2mm 22 Teeth Plastic Single Gear for Stepper Motor Drive - Stepper Motor Drive
Stepper Motor Drive

Unique Bargains 20 Pcs 12mm x 2mm 22 Teeth Plastic Single Gear for Stepper Motor Drive Shaft

Unique Bargains 57mm x 3mm Screw Shaft Drive 2 Phase 4 Wire Micro Stepper Motor DC - Stepper Motor Drive
Stepper Motor Drive

Unique Bargains 57mm x 3mm Screw Shaft Drive 2 Phase 4 Wire Micro Stepper Motor DC 3-6V

2PCS L298N Dual H Bridge DC Stepper SHIELD PER ARDUINO ARM PIC AVR DSP 10A Motor Drive Controller Module For - Stepper Motor Drive
Stepper Motor Drive

2PCS L298N Dual H Bridge DC Stepper SHIELD PER ARDUINO ARM PIC AVR DSP 10A Motor Drive Controller Module For Arduino

2PCS L298N Dual H dualhbridgedcsteppermotordrive Bridge DC Stepper Motor Drive Controller Module For - Stepper Motor Drive
Stepper Motor Drive

2PCS L298N Dual H dualhbridgedcsteppermotordrive Bridge DC Stepper Motor Drive Controller Module For Arduino

DC 12V 5 Line 4 Phase Stepper Motor 28BYJ-48 w Drive Test Module - Stepper Motor Drive
Stepper Motor Drive

DC 12V 5 Line 4 Phase Stepper Motor 28BYJ-48 w Drive Test Module ULN2003

Stepper Motor Drive: find, shop, buy, compare



Find more merchants, products and services and save more time and money! Use this free service anytime to compare prices in Stepper Motor Drive and save time and money. aDealaLot uses many services throughout the internet to bring you the best prices.



Stepper motors and them drivers - A4988 & TB6600

Stepper Motor Drive

So this is a little video about stepper motors and ways of controlling them. Why would you want to ditch your little a4988s, or not! This is intended to be mostly educational, so I hope it does leave you with something! A place to buy them stepper motor drivers: ( Buying through those get's me a commission and probably a buck or two. Of course I'm not expecting of you shopping all your stuff here, but in case you dont have a place in mind, you can find yourself some pretty good deals here a...

Tags: how to controll a stepper motor,stepper motor d...