Sort by:

Price

Stores

Shopping Places

United States

Showing 1 to 10 of 135 products
Kodiak Cutting Tools KCT137388 USA Made Premium Solid Carbide End Mill, Extra Long, 2 Flute, 1/4

Kodiak Cutting Tools KCT137388 USA Made Premium Solid Carbide End Mill, Extra Long, 2 Flute, 1/4", 1-1/2" Length of Cut, 4" Overall Length

1/4 Inch Diameter Solid Carbide End Mill - Extra Long 1/4" Shank, 1-1/2" LOC, 4" OAL, 2 Flutes Diameter Tolerance: +.000"/-.002"Shank Diameter Tolerance: -.0001"/-.0004".
10Pcs CNC Router Bits, Drillpro 1/8

10Pcs CNC Router Bits, Drillpro 1/8" Single Flute End Mill Cutter for Wood, Nylon, Resin, ABS, Acrylic, PVC, MDF

Drillpro 10Pcs 1/8" Single Flute CNC Router Bits Feature: ▶HIGH EFFICIENCY: CNC Router Bit owns sharp edge, which is able for fast engraving that makes high efficiency, the cutting edge length is 22mm ( 1/8 inch) approx. ▶SUPER CHIP REMOVAL: Design of CNC Router Bit is oversized spiral and discharge chips, to prevent sticking knife, raising production efficiency. ▶PERFECT CUTTING: The mirror polishing of CNC Router Bit makes smooth cutting,non-stick crumbs, not black, increase the speed. ▶WIDE APPLICATION: CNC Router Bit is capable to use in materials such as hardwood, medium density board,Nylon, Resin, ABS, Acrylic, PVC, MDF, etc. ▶USAGES: Carving, Cutting, Slotting, Milling, Hollow Cutting ▶SUITABLE MATERIALS: Acrylic, PVC, MDF, medium-density board, lotus board, Solid wood, wood, plastic plate, double color sheet, hardwood,Nylon, Resin, ABS, Aluminium etc. Specifications: -Color: Silver -Material: CNC -Total length: 50mm = 2 inch -Shank diameter (SD): 3.175mm = 1/8 inch -Cutting edge length (CEL): 25mm = 1 inch -Cutting edge diameter (CED): 3.175mm = 1/8 inch Package included: 10 x 1/8" Single Flute Carbide Spiral CNC Router Bit Note: ●Stop immediately in the processing of anomalies when using the CNC Router Bit and find out the reason before processing; ●Pay...
Cobra Carbide 20405 Micro Grain Solid Carbide Long Length General End Mill, TiN Coated, 2 Flute, 30 Degrees Helix, Square End, 1-1/8

Cobra Carbide 20405 Micro Grain Solid Carbide Long Length General End Mill, TiN Coated, 2 Flute, 30 Degrees Helix, Square End, 1-1/8" Cutting Length, 1/4" Cutting Diameter, 3" Length (Pack of 1)

Cobra Carbide general end mill has center cutting geometry. Design for increased chip removal rate. Designed for slotting, profiling and plunging operations. Used for semi-finishing operation. Manufactured from premium sub micron grain carbide. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. Round shanks allow use with a wide variety of toolholding systems. Work material: nickel/inconel alloy and titanium; good for hardened steel, stainless steel; excellent for aluminum alloy, carbon steel, alloy steel and cast iron.
3/8

3/8" 4Fl SE Carbide End Mill

Made in USA. Single End Center Cutting. 4 Flute.
YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter

The YG-1 E5065 uncoated carbide extra-long-length square nose end mill has four flutes, a center-cutting design, and a 30-degree helix angle for general-purpose machining on hardened and high-alloy steel, chromium-nickel steel, steel casting, malleable cast iron, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic. Extra-long-length end mills have longer cutting edges than long-length end mills for applications with a high depth of cut. (Feed should be reduced by around 50%.) Four flutes produce a better finish than fewer flutes. The tool’s square end creates sharp, unrounded cuts. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action. Carbide is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. With no coating or surface treatment, this uncoated tool can be used on a broad range of materials. Cutting diameter tolerance is + 0.0000 to - 0.0012". The round shank accommodates a range of tool holders. End mills are designed to r...
F&D Tool Company 17232-AT1710 Two Flute Ball Nose End Mill for Aluminum, Single End, Long, High Speed Steel, 5/16

F&D Tool Company 17232-AT1710 Two Flute Ball Nose End Mill for Aluminum, Single End, Long, High Speed Steel, 5/16" Mill Diameter, 3/8" Shank Diameter, 1.375" Flute Length, 3.125" Overall Length

Endmill Available in HSS, Cobalt, and Carbide with non-center and center single end and double end. 2, 3, 4 and multiple flutes LH and RH cut and LH and RH spiral.
Cleveland Twist 1/2

Cleveland Twist 1/2" x 1/2" x 4" 3-Flute TiCN Coated High Speed Steel Long Single End Mill

3-flute center cutting end mills for plunge cutting capability. 3-flute design to minimize chatter and larger flute spacing than a multi-flute for better chip removal. Designed for all materials. Profile/slotting.
7/16

7/16" x 1/2" Shank 4F Cobalt C/C Single End Mill - Long

No. of Flutes: 4 / Single End, Center-Cutting, Long Flute / General purpose application - square end
YG-1 E5018 Carbide Ball Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 6

YG-1 E5018 Carbide Ball Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 6" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter

The YG-1 E5018 uncoated carbide extra-long-length ball nose end mill has two flutes and a 30-degree helix angle for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic. Extra-long-length end mills have longer cutting edges than long-length end mills for applications with a high depth of cut. (Feed should be reduced by around 50%.) The two flutes have better chip-carrying capacity than end mills with more flutes while offering additional support when the tool goes deep into the material in applications with a high depth of cut. The tool’s ball nose creates contoured surfaces where sharp corners are not required. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. Carbide is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. With no coating or surface treatment, this uncoated tool can be used on a range of ma...
YG-1 E5014 Carbide Ball Nose End Mill, Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 3

YG-1 E5014 Carbide Ball Nose End Mill, Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 3" Overall Length, 0.375" Cutting Diameter, 0.375" Shank Diameter

The YG-1 E5014 uncoated carbide long-length ball nose end mill has two flutes and a 30-degree helix angle for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic. Long-length end mills have longer cutting edges than standard-length end mills for applications with a high depth of cut. (Feed should be reduced by around 50%.) The two flutes have better chip-carrying capacity than end mills with more flutes while offering additional support when the tool goes deep into the material in applications with a high depth of cut. The tool’s ball nose creates contoured surfaces where sharp corners are not required. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. Carbide is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. With no coating or surface treatment, this uncoated tool can be used on a range of materials....
7/16
Single End Long Mill

7/16" x 1/2" Shank 4F HSS Single End Mill - Long

5/16
Single End Long Mill

5/16" x 3/8" Shank 4F HSS Single End Mill - Extra Long

3/4
Single End Long Mill

3/4" X 3/4" HSS 4 Flute Single End Long End Mill, Qualtech, DWCF732

Unique Bargains 4mmx4mmx22mm Round Shank Single Flute Carbide Spiral End Mill Cutter 45mm - Single End Long Mill
Single End Long Mill

Unique Bargains 4mmx4mmx22mm Round Shank Single Flute Carbide Spiral End Mill Cutter 45mm Long

5/8
Single End Long Mill

5/8" x 1/2" Shank 4F HSS Single End Mill - Extra Long

Single End Long Mill: find, shop, buy, compare



aDealaLot Search Engine searches more stores for the cheapest prices on Single End Long Mill to help you save time and money. Compare prices, read product information, store ratings, find similar products, rebates, closeouts, new and refurbished products, narrow your price search to find exactly what you want, read consumer reviews on the product you are interested in and much more. Always find the cheapest price before you buy your product.



Aluminum T-rex relief | LongMill

Single End Long Mill

The LongMill (www.sienci.com/longmill) is Sienci Labs' new larger format benchtop CNC machine. In this video, it got a taste for aluminum. The cutting time was around 4 hours. The feeds weren't explicitly calculated since this job was run as a stress test to see how the machine would handle it. A lot of the bulk material removal was done using a 16mm dado router bit at 1800mm/min with 40% step over while running the router at around 25k RPM. Then a waterline cleanup was run with a single f...

Tags: cnc,cnc router,sienci,sienci labs,aluminum mill...