Operate your router and other tools with hands-free convenience. The Billy Pedal is a spring loaded safety switch that turns off the tool when you lift your foot from the pedal. Simply plug our foot switch into your electrical outlet, then plug your tool into the Billy Pedal. 15 Amp. Includes 8 foot cord.Hands-free router control means both hands on your work for safety and controlNo need to free a hand to hunt for your router switch5 star performance and priceGreatly enhances router safetyMLCS quality guaranteed
This easy-to-operate foot switch allows you to operate table routers, scroll saws, drill presses, lathes and rotary tools hands-free! Installation is easy-simply plug the foot switch into a grounded outlet, then plug the machine into the foot switch and you're ready to go. A two-step design allows you to press once to turn the switch on and again to turn the switch off.
Woodtek 108815, Machinery Components, Controls, Electric Foot Switch, On/Off
Easy continuous operation. Spend more time woodworking and less time constantly fumbling for the power switch. The Woodtek electric foot switch can be used with scrollsaws, router tables, sanders or any power tool rated at a maximum of 15A: Tool plugs into foot switch and 7' cord plugs into a grounded 115V outlet. 908-190 - With the momentary switch, press and hold down to run; release to stop. 108-815 - On/off switch lets you press and release to turn on; press and release to turn off. One year parts and workmanship warranty. Imported.
SSC Controls S420-1501 Foot Switch, Maintained Action (Push On / Push Off), 8-ft Cable with Piggyback Plug (3-Pronged), Single Pedal, Electrical, Made in USA
The S420-1501 foot switch can be used to turn on and off electrical devices with a tap of your foot. Tap the pedal once at the front (toe) end to turn it on, then tap again at the other end to turn it off. You can remove your foot and it will stay on until you turn if off (like a light switch). Ideal for lighting, power tools, office equipment, and more. This foot switch is constructed with a steel housing and a solid steel shaft for added toughness. It has a 15-amp, 125 VAC electrical rating (which is the same as the wall outlet current in the US). The 15-amp rating far exceeds the 4-amp rating of common comparable models to make it very versatile. Includes an 8-foot cable and 3-pronged piggyback plug (NEMA 5-15 series). To hook it up to your device, simply plug the pedal into your wall outlet (US only), and then plug your device into the back of that plug, and the foot switch will now be in line with the device. Enclosure rating: UL/CSA/NEMA Type 1 and IEC 60529 IP20. For indoor use in dry environments. CSA Certified and UL Listed to US and Canadian standards. Size: 4.2" L x 3.4" W x 1.5" H, plus the cable. One year warranty on parts and labor. Made in the USA by The SSC Controls Company.
Maximm Cable 3 Feet Indoor 3 Outlet Extension Cord with Foot Switch - 3 Electrical Power Outlet Foot Tap Extension Cord with Safety Water Proof Cover - 2 Pack - ETL Listed
Maximm 6 Feet Foot Switch Extension Cord with Safety Cover These extension cords are unique for their sleek and adaptable design. Foot SwitchEasily turn on or off any device plugged into the extension cord with a simple tap of your foot.. Clutter ControlMultiple UsesThe three outlet extension cord just makes it easy and convenient by providing you with up to 3 additional outlets for power distribution, letting you add another appliance or device right there without pulling out an extra cord and getting the same extension. The outlets are arranged with 2 plugs spaced conveniently on one side with the other plug on the opposite side. Quality construction The extension cord is UL listed and adheres to industry standards for safety and quality assurance for an added peace of mind. Specifications Length: 6 Feet Connector 1: 1 NEMA 1-15P male (polarized plug) Connector 2: 3 NEMA 1-15R female (sockets) Wire gauge: 16AWG Max. power rating: 1625 watts (13 amps at 125 volts)
2 Pcs Black Foot Pedal Push Switch Inline Lamp Light On-off Control Footswitch
It is ideal for light-duty industrial, medical, office, and many other applications. It can be operated by foot or hand. Simple to use and easy to install. Features: Diameter: 7cm Height: 3cm Rated Voltage: 110V-250V Rated Current: 2A Material: Plastic Package: Quantity: 2 pcs Switch
The StealthSwitch FS-2 is a momentary contact footswitch pedal with a 6-foot cable terminating in a 3.5mm (1/8 inch) mono audio plug. This rear-hinge, durable, metal, foot switch was designed with a weighted base, non-skid pads, and a rubber foot grip for increased stability and support. The Stealth Switch FS-2 has a sensitive switch activation with approx. ¼ inch switch travel for added convenience and accessibility. Made in China. NOTE: The FS-2 is a footswitch only and requires a controller (like the Microsoft Xbox Adaptive Controller) in order to connect it to an Xbox or computer. Dimensions: 4.04 x 2.66 x 1.18 inches (L x W x H)
Linemaster T-91-SC3A Treadlite II Foot Switch, Electrical, Single Pedal, Momentary, SPDT Wired N.O., No Guard, Black, 8 ft. Cord with 3 prong plug
This Linemaster T-91-SC3A Treadlite II 15 amp 125V, 1/2 HP foot switch has steel-formed housing, non-skid pads, and cord with plug and is suitable for use in applications in which users need hands-free, on-and-off power activation. The foot switch provides momentary operation for quick-release termination. It has a steel-formed housing with an electro-coated finish for durability and protection from corrosion. The non-skid foot pad and base give the foot switch stability to help prevent sliding on smooth floors, and it and has bolt holes for mounting to the floor or equipment. The low profile and light pressure required to operate reduces operator fatigue. An adjustable strain relief clamp protects the cord (included) from damage caused by pulling or stretching. This foot switch meets Canadian and United States Underwriters Laboratories (UL) standards for quality assurance and meets European Conformity (CE) product compliance safety standards. It has an Ingress Protection (IP) rating of 20 for protection against small amounts of dripping water and access with a finger, and it is compliant with the Restriction of Hazardous Substances (RoHS) directive. A heavy gauge steel guard and other accessories are available for this product (contact manufacturer). This momentary operation fo...
NEW! Electes 10 Feet 3 Grounded Outlets Extension Cord with Foot Switch and Light Indicator, 16/3, Green - UL Listed
Just sit and relax far from the outlet and device and still control their power by the tap of your foot. Also great for the elderly to use with hand or foot. Cord starts with a 3 prong plug at one end - then comes the foot switch after 4 ft of wire - then is the rest of the wire till the end where you have 3 grounded outlets. Also features indicator light and twist-lock receptors for safety. Cord is UL listed, 16/3, 125V, 16AWG, 13AMPS, 10 feet, Green, 1625W -when using incandescent lamp it is best only with 500W
URBEST Black AC 250V 10A SPDT NO NC Momentary Foot Pedal Switch for CNC Industrial with Anti-Skid Rubber Surface
It free up your hands to perform other procedure while make the operation in control with your foot. This foot switch is momentary action and can be wired to be either push-on or push-off. Could be used in industry equipment and other fields need foot switch. Package Content : 1 x Foot Pedal Switch
aDealaLot Search Engine is a new technology comparison shopping portal. Compare the cheapest price on any product. Online shopping is now fast, easy and free. Compare prices on Off Foot Pedal before you make a purchase and find the store that sells your product for the best price. Comparison shop the internet for the lowest prices. Easily search thousands of stores on millions of products and save time from going to store-to-store checking prices.
Control power tools using a Foot Pedal Switch
Off Foot Pedal
When using some of the power tools, you need to use both hands and also control on/off the tool. In this case, for my drill press I wanted a better control when to start it without moving it. This concept is based on the same build I made few years ago that I use for my table saw that I also built.
The foot switch you can buy at eBay, search for' Foot Pedal Switch". Here is 1 example: