Sort by:

Price

Stores

Shopping Places

United States

Showing 1 to 10 of 705 products
Anderson Metals Brass Hose Fitting, Connector, 3/8

Anderson Metals Brass Hose Fitting, Connector, 3/8" Barb x 1/4" Female Pipe

HOSE BARB - UPC Flag tagged, barb X female pipe. 1 piece, except swivels (nut & stem). Use with plastic tubing or rubber hose. +32 to 250 degree F temperature range. Intended for use with hose clamp or crimp type ferrule. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Dixon Valve & Coupling DCP21B Brass Air Chief Industrial Interchange Quick-Connect Air Hose Fitting, Plug, 1/4

Dixon Valve & Coupling DCP21B Brass Air Chief Industrial Interchange Quick-Connect Air Hose Fitting, Plug, 1/4" Coupling x 1/4" NPT Male

This Dixon DCP21B brass Air Chief industrial interchange quick-connect 1/4" air hose plug has a 1/4" male NPT threaded end, valveless construction, and connects to Air Chief industrial interchange quick connect couplers. The female National Pipe Thread (NPT) connection end connects to male threaded connections. Brass is corrosive resistant, ductile at high temperatures, and has a low magnetic permeability. This plug's maximum operating pressure (MWP) is 300 psi (20.41 bar) at 70 degrees F in an operating temperature range of -40 to +250F (-40 to +121.11C) with a flow rating 37 cubic feet per minute (CFM) at 100 psi. The valveless construction allows flow when the plug is disconnected. This plug conforms to MIL-C-4109F/A-A-59439 specifications for quick-disconnect couplings for hoses and portable pneumatic tools, but not water or fluids, at maximum working pressures up to 232 psi (16 bar). It is used for air service only.SpecificationsFitting-end connection1/4" plugHose-end connection1/4" male NPT threadMaterialBrassMaximum working pressure300 psi (20.41 bar)Operating temperature range-40 to +250F (-40 to +121.11C)Flow in CFM @ 100 psi37FluidAir service onlyHose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of ...
Tru-Flate 21-143 1/4

Tru-Flate 21-143 1/4" NPT Male Fitting x 3/8" ID Hose Barb Type Fitting

Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.
Anderson Metals 56108 Brass Pipe Fitting, Cap, 1/4

Anderson Metals 56108 Brass Pipe Fitting, Cap, 1/4" NPT Female Pipe

This Anderson Metals 56108 cap is a brass pipe fitting with 1/4" female NPT threads. The cap fitting closes or terminates the end of a pipe or fitting. It has female National Pipe Taper (NPT) threads for connecting to male threaded pipes, creating a tighter seal than straight threads. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. The fitting is suitable for handling pressures up to 1,200 pounds per square inch (psi) and has an operating temperature range of -65 to +250 degrees F. This fitting meets Society of Automotive Engineers (SAE), American Society of Mechanical Engineers (ASME), American Standards Association specifications for quality assurance.Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).Anderson Metals manufactures brass fittings, valves, and pipe nipples. The company, founded in 195...
Dernord 1.5

Dernord 1.5" Sanitary Tri Clamp to 1/4" NPT Female Tri Clover

When purchasing DERNORD fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
Steelman 98459 30-Foot x 3/8-Inch Rubber Air Hose, 3/8-inch NPT -

Steelman 98459 30-Foot x 3/8-Inch Rubber Air Hose, 3/8-inch NPT Fittings

This hose is perfect for any workshop or automotive service center, where a good quality air hose is needed. Each end of this STEELMAN 98459 30-foot Rubber Air Hose is equipped with brass 3/8-inch NPT ends to connect to your air tools or existing pneumatic infrastructure. With a working pressure of 300 PSI, you don't have to worry about a burst hose causing damage to your shop or tools.STEELMAN is an industry leader in automotive and industrial specialty tools and equipment, manufacturing the highest quality, unique, and innovative tools and products, designed to meet the specific needs of mechanics, contractors, and other working professionals.
Dixon RN23 Stainless Steel 316 Hose Fitting, Insert, 3/8

Dixon RN23 Stainless Steel 316 Hose Fitting, Insert, 3/8" NPT Male x 1/4" Hose ID Barbed

This Dixon hose fitting is made of type 316 stainless steel and connects hose to female threaded pipe conforming to the NPT standard. This adapter is for connecting a hose to a female National Pipe Taper (NPT) threaded connector. A barbed fitting on one end creates a tight seal on flexible or semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (not included), and male NPT threads on the other end to connect to female NPT threaded connections. This fitting is made of Type 316 stainless steel for higher strength and greater corrosion resistance than Type 304 stainless steel.Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.Dixon Valve & Coupling Company manufactures pipe and hose ...
Dixon Valve HB150 Polypropylene Shank/Water Fitting, Tuff-Lite King Combination Nipple, 1-1/2

Dixon Valve HB150 Polypropylene Shank/Water Fitting, Tuff-Lite King Combination Nipple, 1-1/2" NPT End x 1-1/2" Hose ID Barbed

This Dixon HB150 fitting is a King nipple for connecting hoses in discharge or suction service. It is made of polypropylene (PP) for resistance to chemicals. It has a barbed shank on one end for connecting a hose with a 1-1/2" inside diameter (ID) and a 1-1/2" male National Pipe Taper (NPT) threaded connection on the other end for connecting to a female fitting. It has a thick wall for strength and durability and has a maximum pressure rating of 150 pounds per square inch (psi). This fitting is not recommended for use with compressed gas, nor aromatic hydrocarbons, carbon tetra-chloride, gasoline, hexane, kerosene, nitric acid, sodium hydrochlorite, toluene, trichloroethylene or xylene.Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road co...
Anderson Metals 57001-0402 Brass Hose Fitting, Adapter, 1/4

Anderson Metals 57001-0402 Brass Hose Fitting, Adapter, 1/4" Barb x 1/8" NPT Male Pipe

Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.Anderson Metals manufactures brass fittings, valves, and pipe nipples. The company, founded in 1951, is headquartered in Kansas City, MO.
Spears 1435 Series PVC Tube Fitting, Adapter, Schedule 40, Gray, 2

Spears 1435 Series PVC Tube Fitting, Adapter, Schedule 40, Gray, 2" Barbed x NPT Female

The Spears 1435 series tube fitting is made of gray polyvinyl chloride (PVC) plastic and connects schedule 40 polyethelene (PE) pipe to threaded pipe conforming to the National Pipe Thread (NPT) standard. This adapter has a barbed fitting on one end to create a tight seal on flexible PE pipe when used with a hose clamp (sold separately), and a female NPT connector on the other end connects to threaded pipe. PVC is corrosion resistant, and has high strength. It resists reactions with acids, gasoline, alcohol, and hydrocarbons. The fitting meets D 2609 standards set by ASTM International for plastic insert fittings for use with PE pipe, as well as ASTM schedule 40 standards for wall thickness to support working pressure to 140 psi. It is certified by NSF International for use with potable water. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Spears Manufacturing produces thermoplastic fittings and valves for fluid, drain, waste, and vent syst...
Interstate Pneumatics HRPZ26-01 3/8 Inch Reusable Hose-End Repair Fitting with 1/4 Inch NPT Male for 3/8 Inch Polyurethane Hose (HU16 Series) (Pack of - Npt End Fitting
Npt End Fitting

Interstate Pneumatics HRPZ26-01 3/8 Inch Reusable Hose-End Repair Fitting with 1/4 Inch NPT Male for 3/8 Inch Polyurethane Hose (HU16 Series) (Pack of 2)

Interstate Pneumatics FM98-5 Brass Hose Barb Fitting, Connector, 5/8
Npt End Fitting

Interstate Pneumatics FM98-5 Brass Hose Barb Fitting, Connector, 5/8" Barb X 3/4" NPT Male End

Interstate Pneumatics FM46 Brass Hose Barb Fitting, Connector, 3/8
Npt End Fitting

Interstate Pneumatics FM46 Brass Hose Barb Fitting, Connector, 3/8" Barb X 1/4" NPT Male End

Interstate Pneumatics FMBS46 Steel Hose Barb Ball Swivel Fitting, Connector, 3/8
Npt End Fitting

Interstate Pneumatics FMBS46 Steel Hose Barb Ball Swivel Fitting, Connector, 3/8" Swivel Barb X 1/4" NPT Male End

Interstate Pneumatics FM98 Brass Hose Barb Fitting, Connector, 1/2
Npt End Fitting

Interstate Pneumatics FM98 Brass Hose Barb Fitting, Connector, 1/2" Barb X 3/4" NPT Male End

X828 1/2 NPT End Plug / Fitting Aluminum - Npt End Fitting
Npt End Fitting

X828 1/2 NPT End Plug / Fitting Aluminum BLACK

X827 3/8 NPT End Plug / Fitting Aluminum - Npt End Fitting
Npt End Fitting

X827 3/8 NPT End Plug / Fitting Aluminum BLACK

X826 1/4 NPT End Plug / Fitting Aluminum - Npt End Fitting
Npt End Fitting

X826 1/4 NPT End Plug / Fitting Aluminum BLACK

X825 1/8 NPT End Plug / Fitting Aluminum - Npt End Fitting
Npt End Fitting

X825 1/8 NPT End Plug / Fitting Aluminum BLACK

Black 3/8 OD Hose Barb End Nipple To 3/8 Npt Fitting Adapter 90 Deg - - Npt End Fitting
Npt End Fitting

Black 3/8 OD Hose Barb End Nipple To 3/8 Npt Fitting Adapter 90 Deg - Warranty

Npt End Fitting: find, shop, buy, compare



Tips to find the best prices on Npt End Fitting. Always take into consideration specials, rebates or other savings, including shipping, handling and taxes. aDealaLot Search Engine will always search for these offers, including the total cost, and provide you with the best price. New products, merchants and services are always being added to help you save time and money. Compare prices, read reviews on products and merchants and find specials not offered anywhere else.



NPT to Barb Hose End Fitting Demonstration Video

Npt End Fitting

http://viperperformance.co.uk Viper Performance NPT to Barb Hose End Fitting technical demonstration video To find out more or purchase this product visit: https://www.viperperformance.co.uk/45_fuel-hose-fittings-and-separators.html 90°: https://www.viperperformance.co.uk/fuel-hose-fittings-and-separators_10015_npt-male-to-barb-fitting90-angle.html 45° https://www.viperperformance.co.uk/fuel-hose-fittings-and-separators_10014_npt-male-to-barb-fitting45-angle.html Straight: https://www.vip...

Tags: Fuel adapter,NPT to Barb,viper performance,vipe...