Sort by:

Price

Stores

Shopping Places

United States

Showing 1 to 10 of 458 products
Fiber Patch Cable, VANDESAIL 10G Gigabit Fiber Optic Cables with LC to LC Multimode OM3 Duplex 50/125 OFNP (2M, -

Fiber Patch Cable, VANDESAIL 10G Gigabit Fiber Optic Cables with LC to LC Multimode OM3 Duplex 50/125 OFNP (2M, OM3-5Pack)

【Description】 VANDESAIL 10Gb Fiber Optic Cable Multimode OM3 Duplex 50/125 LC to LC Male to Male Introduction: The Fiber Patch Cable is a Jumper between Optical and the terminal box. These fiber cords are OM3 rated for the extreme demands of SAN networks. It is used in optical fiber communication systems, optical fiber access networks, fiber optic data transmission, local area network and some other areas. Specifications:  - Condition: 100% Brand new  - Package including: 1x 10Gb Fiber Patch Cable - Length: 1m/3.3ft, 2m/6.6ft, 3m/9.8ft, 5m/16.4ft, 10m/32.8ft - Classification: OM3 LOMMF  - Type: Bend-Insensitive Multimode (BIMMF)  Features:  - Conforms with International Telecommunication Standard - High speed transmission - A Level three-ring ceramic mortise - Exquisite and mature crafts - 3D Interferometer pass - Environmental protection
1 Meter Multimode Duplex Fiber Optic Cable (62.5/125) - LC to LC - -

1 Meter Multimode Duplex Fiber Optic Cable (62.5/125) - LC to LC - Orange

FeaturesUltra Spec Cables' OM1 (62.5/125) Fiber Optic Cables are pre-terminated with LC to LC Connectors, so they are ready for deployment in any Faster Ethernet Network environment. Our cables are manufactured using Corning Optical Fiber and OFNR Rated PVC Zipcord jackets, which are lightweight, flexible and non-flammable. Each cable is factory tested for insertion and return loss to ensure maximum performance and realibility. They're available in lengths from 0.3M up to 300M and in SC, ST, FC and LC configurations with alternate modes and polishes.BenefitsPlug and play cables save time in the field since there is no onsite termination necessary. Fiber is preferred over copper because it provides increased bandwidth, low signal loss and is immune to interference. Fiber can carry data longer distances with more reliability and with less repeaters required. It's a long term, cost effective solution to securely transmit data requiring high transfer rates (i.e. Gigabit Ethernet, Fibre Channel and Infiniband).ApplicationsComputer Networking - Transfers data at a higher rate of speed.Military and Defense - Transmits data signals more clearly.Telecommunications - Carries data to internet, cable TV and phone subscribers at greater bandwidths.Healthcare Industry - Used in imaging devices...
FiberCablesDirect - 5M OM3 LC LC Fiber Patch Cable | 10Gb Duplex 50/125 LC to LC Multimode Jumper 5 Meter (16.40ft) | Length Options: 0.5M-300M | 1g 10g 40g lc-lc -

FiberCablesDirect - 5M OM3 LC LC Fiber Patch Cable | 10Gb Duplex 50/125 LC to LC Multimode Jumper 5 Meter (16.40ft) | Length Options: 0.5M-300M | 1g 10g 40g lc-lc dplx mmf 10gbase sfp+ aqua ofnr lommf

5 Meter OM3 LC LC Fiber Patch Cable | 10Gb Duplex 50/125 Multimode Jumper Cord. Accelerate your network's performance to the edge of technology with this Corning 50/125um core/cladding, OM2 backwards compatible, laser optimized multimode fiber cable and extend your 10Gbps reach up to 300 meters. Assembled with ofnr riser rated, 2.0mm outer diameter, zip-cord reinforced, aqua pvc jacket that's flame retardant, water resistant, UV resistant and immune to electrical interference. Terminated with small form factor, 1.25mm ceramic ferrule LC type connectors and includes pre-installed, lc duplex clips for quick installation and management in high density cable environments. Engineered for fast and reliable connectivity between switches, transceivers, media converters, patch panels and other 1/10/40g fiber optic equipment. Fully supports fast Ethernet, 10 Gigabit Ethernet, SFP+, QSFP+, Fiber Channel, OIF, ATM, and other service provider applications.Ethernet Over OM3 Multimode Fiber Details: 1500 / 2000 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 300m | 40Gb Ethernet 40GBase-SR4 100m (330m QSFP+ eSR4) | 100Gb Ethernet 100GBase-SR10 100m.Maximum Connector...
LC to LC Fiber Patch Cable Multimode Duplex - 1m (3.28ft) - 50/125um OM3 10G (2 Pack) - Beyondtech PureOptics Cable -

LC to LC Fiber Patch Cable Multimode Duplex - 1m (3.28ft) - 50/125um OM3 10G (2 Pack) - Beyondtech PureOptics Cable Series

Easy installation Beyondtech OM3 50/125 LC to LC Fiber Patch cable simplify the installation process and reduce the total cost of ownership of your project, due to pre-terminated fiber intrinsic plug-and-play characteristic. 10 Gigabit Performance OM3 laser optimized fiber patch cords are designed to be used in LAN, WAN and SAN 10GB networks and is able of handling the most challenging telecommunications data transmission requests. Fully compatible with VCESL laser light sources and existing 50/125 equipment. Properly tested Each patch cord is individually and rigorously tested and certified to be within accurate optical insertion loss. Cable Specifications: Wavelengths: 850 and 1300 Aqua Jacket Bend Radius: Minimum / 5cm Cable Jacket: 3.0mm PVC Operating Temperature: -4° to 158° F (-20° to +70° C)Core:OM3 50/125 Standard Zip Cord OM3 50/125 fiber conforms to ITU-T G.651.1, TIA/EIA 492AAAC and IEC60793-2-10 A1a.2a standards Multiple Sizes Available LC/LC connector (Fiber Patch Cable) Beyondtech LC LC Patch Cord feature precision hold, plastic ferrule. They comply with all RoHS environmental specifications. LC to LC Multimode Duplex are designed for LC / LC fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds, data center, premises, educational, LAN, SAN, commercial an...
Cable Matters 10Gb 40Gb Multimode Duplex 50/125 OFNP Fiber Cable (OM3 Fiber Optic Cable/LC to LC Fiber Patch Cable) -

Cable Matters 10Gb 40Gb Multimode Duplex 50/125 OFNP Fiber Cable (OM3 Fiber Optic Cable/LC to LC Fiber Patch Cable) 2m

10 Gigabit Performance for Critical Connections These fiber cords are OM3 rated for the extreme demands of SAN networks. The OFNP (plenum) rating conforms to strict NEC building safety codes but is compatible with unrated or OFNR (riser) rated applications. They are precision factory tested for insertion and return loss to ensure transmission performance per TIA-568-C.3 specifications. The combination of LC connectors in a protective yoke, strain relief boots and zirconia ceramic ferrules provides a dependable, low-loss performance. Bend Insensitive Engineering Bend insensitive multimode fiber (BIMMF) provides greater flexibility in tight spaces or long cable runs with multiple bends. BIMMF fiber cable is engineered with an extra layer of glass around the core to ensure optical performance and provide durability for the extreme requirements of SAN network or high density patch panel installations. It offers interoperability and backwards compatibility with OM3 and OM4 50 micron fiber systems. Protect your network against macro-bend losses that are difficult to isolate, troubleshoot, and repair. Plug & Play Installation with a Lifetime Warranty The Cable Matters Multimode Duplex 50/125 micron fiber patch cords offer a time saving alternative to terminating and testing cables on...
Fiber Patch Cable - LC to LC OM3 10Gb/Gigabit Multi-mode Duplex 50/125 LSZH Fiber Optic Cord for SFP Transceiver, Computer Fiber Networks and Fiber Test Equipment, 3-Meter(10ft, -

Fiber Patch Cable - LC to LC OM3 10Gb/Gigabit Multi-mode Duplex 50/125 LSZH Fiber Optic Cord for SFP Transceiver, Computer Fiber Networks and Fiber Test Equipment, 3-Meter(10ft, 4-Pack)

10Gtek 4pcs Packing for LC-LC Fiber Patch Cord, OM3 Multi-mode Duplex, LSZH, 3-Meter(10ft) 10 Gigabit Performance for Critical Connections These fiber cords are OM3 rated for the extreme demands of SAN networks. They are precision factory tested for insertion and return loss to ensure transmission performance per TIA-568-C.3 specifications. The combination of LC connectors in a protective yoke, strain relief boots and zirconia ceramic ferrules provides a dependable, low-loss performance. Bend Insensitive Engineering BEND INSENSITIVE DESIGN allows for a 7.5mm bending radius that is 4X more flexible than standard 50 micron fiber cables. Bend insensitive multimode fiber (BIMMF) provides greater flexibility in tight spaces or long cable runs with multiple bends. ApplicationOM3 classification rating operates with Gigabit Ethernet 1000Base-SX, or 10GBase-SR/LRM, and Fibre Channel 100/200/400/1200-MX; Backwards compatible with FDDI, and Fast Ethernet 10/100BASE SX or FX. Cable Specifications - Connectors: LC to LC - Core: 50 um - Cladding: 125 um - Jacket: LSZH - OD: 2.0mm - Classification: OM3 - Wavelengths: 850 and 1300nm - Type: Bend-Insensitive Multimode (BIMMF) - Ferrule Material: Ceramic - Polish: PC - Compliance: TIA 568-C.3 / 604-10 / 492AAAC, UL 910, C E, RoHS Warranty ...
LC to LC Fiber Patch Cable Multimode Duplex - 2m (6.56ft) - 62.5/125um OM1 (2 Pack) - Beyondtech PureOptics Cable -

LC to LC Fiber Patch Cable Multimode Duplex - 2m (6.56ft) - 62.5/125um OM1 (2 Pack) - Beyondtech PureOptics Cable Series

Easy installation Beyondtech OM1 62.5/125 LC to LC Fiber Patch cable simplify the installation process and reduce the total cost of ownership of your project, due to pre-terminated fiber intrinsic plug-and-play characteristic. EMI immunityOM1 Multimode fiber is immune to many environmental factors, such as Electromagnetic Interference and Radio-Frequency interference, so it is possible to run patch cords next to industrial equipment without any problem. Properly tested Each patch cord is individually and rigorously tested and certified to be within accurate optical insertion loss. Cable Specifications: Wavelengths: 850 and 1300 Orange Jacket Bend Radius: Minimum / 5cm Cable Jacket: 3.0mm PVC Operating Temperature: -4° to 158° F (-20° to +70° C)Core:OM1 62.5/125 Standard Zip Cord OM1 62.5/125 fiber conforms to ITU-651, TIA/EIA 492AAAA Multiple Sizes Available LC/LC connector (Fiber Patch Cable) Beyondtech LC LC Patch Cord feature precision hold, plastic ferrule. They comply with all ANSI/EIA/TIA standards. LC to LC Multimode Duplex are used to connect LC / LC devices and are suitable for Gigabit Ethernet, video, multimedia, premise installations, test and measurement, industrial, and military applications. Connectors feature dust caps on the tips for protection
Fiber Patch Cord - 5 Pack - Duplex - ST to ST - Multimode 62.5/125 (2 -

Fiber Patch Cord - 5 Pack - Duplex - ST to ST - Multimode 62.5/125 (2 Meter)

Our Multimode fiber patch cords are made with Corning glass, are riser rated PVC (ONFR), and have a 3.0mm Orange jacket. Each patch cord has been rigorously tested to ensure they meet industry standard dB Loss and Insertion Loss ratings, with test results for dB and insertion loss testing printed on each cables packaging. Each jumper is also serialized and inspected to the IEC-61300-3-35 end face standard. This is an extra step we take to ensure our patch cables are of the highest quality. We offer our patch cords in 5 Packs and lengths stocked are 1,2,3,5, & 10 Meter.
ST to ST Fiber Patch Cable Multimode Duplex - 1m (3.28ft) - 50/125um OM2 - Beyondtech PureOptics Cable -

ST to ST Fiber Patch Cable Multimode Duplex - 1m (3.28ft) - 50/125um OM2 - Beyondtech PureOptics Cable Series

Easy installation Beyondtech OM2 ST to ST Fiber Patch cable simplify the installation process and reduce the total cost of ownership of your project, due to pre-terminated fiber intrinsic plug-and-play characteristic. EMI immunity OM2 Multimode fiber is immune to many environmental factors, such as Electromagnetic Interference and Radio-Frequency interference, so it is possible to run patch cords next to industrial equipment without any problem. Properly tested Each patch cord is individually and rigorously tested and certified to be within accurate optical insertion loss. Cable Specifications Wavelengths: 850 and 1300nm Orange Jacket Bend Radius - Minimum / 5cm Cable Jacket (3.00mm) Operating Temperature / -4° to 158° F (-20° to +70° C) Multimode 50/125um Standard Zip Cord OM2 fiber conforms to ITU-651, TIA/EIA 492AAAA Multiple Sizes Available ST/ST connector (Fiber patch cord) Beyondtech ST ST Patch Cord feature precision hold, plastic ferrule connectors . They comply with all ANSI/EIA/TIA standards. ST to ST Multimode Duplex are used to connect network devices and are suitable for Gigabit Ethernet, video, multimedia, premise installations, fiber optics patch panels, fiber optic transceiver and fiber optic network, industrial, and military applications. Connectors f...
FiberCablesDirect - 1M OM3 LC SC Fiber Patch Cable | 10Gb Duplex 50/125 LC to SC Multimode Jumper 1 Meter (3.28ft) | Length Options: 0.5M-300M | 1/10/40/100g dplx mmf 10gbase -

FiberCablesDirect - 1M OM3 LC SC Fiber Patch Cable | 10Gb Duplex 50/125 LC to SC Multimode Jumper 1 Meter (3.28ft) | Length Options: 0.5M-300M | 1/10/40/100g dplx mmf 10gbase sfp+ lommf ofnr om3-lc-sc

1 Meter OM3 LC SC Fiber Patch Cable | 10Gb Duplex 50/125 Multimode Jumper Cord. Accelerate your network's performance to the edge of technology with this Corning 50/125um core/cladding, OM2 backwards compatible, laser optimized multimode fiber cable and extend your 10Gbps reach up to 300 meters. Assembled with ofnr riser rated, 2.0mm outer diameter, zip-cord reinforced, aqua pvc jacket that's flame retardant, water resistant, UV resistant and immune to electrical interference. Terminated with small form factor, 1.25mm ceramic ferrule LC and 2.5mm ceramic ferrule SC type connectors and includes pre-installed lc/sc duplex clips for quick installation and management in high density cable environments. Engineered for fast and reliable connectivity between switches, transceivers, media converters, patch panels and other 1/10/40g fiber optic equipment. Fully supports fast Ethernet, 10 Gigabit Ethernet, SFP+, QSFP+, Fiber Channel, OIF, ATM, and other service provider applications.Ethernet Over OM3 Multimode Fiber Details: 1500 / 2000 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 300m | 40Gb Ethernet 40GBase-SR4 100m (330m QSFP+ eSR4) | 100Gb Ethernet 100GB...
SCP-STP-MD6 - SC/PC to ST/PC multimode 62.5/125 duplex fiber optic patch cord cable, 1m Default - Multimode Fiber Patch Cord
Multimode Fiber Patch Cord

SCP-STP-MD6 - SC/PC to ST/PC multimode 62.5/125 duplex fiber optic patch cord cable, 1m Default Title

ST/PC to ST/PC multimode 62.5/125 duplex fiber optic patch cord cable, - Multimode Fiber Patch Cord
Multimode Fiber Patch Cord

ST/PC to ST/PC multimode 62.5/125 duplex fiber optic patch cord cable, 2m

SCP-STP-MD6 - SC/PC to ST/PC multimode 62.5/125 duplex fiber optic patch cord cable, 3m Default - Multimode Fiber Patch Cord
Multimode Fiber Patch Cord

SCP-STP-MD6 - SC/PC to ST/PC multimode 62.5/125 duplex fiber optic patch cord cable, 3m Default Title

ST/PC to ST/PC multimode 62.5/125 duplex fiber optic patch cord cable, - Multimode Fiber Patch Cord
Multimode Fiber Patch Cord

ST/PC to ST/PC multimode 62.5/125 duplex fiber optic patch cord cable, 5m

ST to ST Multimode Fiber Duplex Patch - Multimode Fiber Patch Cord
Multimode Fiber Patch Cord

ST to ST Multimode Fiber Duplex Patch Cord

Fiber Patch Cord 15 Meter LC/LC Duplex Multimode OM2 50/125 Fiber Cable - - Multimode Fiber Patch Cord
Multimode Fiber Patch Cord

Fiber Patch Cord 15 Meter LC/LC Duplex Multimode OM2 50/125 Fiber Cable - 2085

FiberHal LC to LC Fiber Optic Cable, 10Gb Multimode Fiber Patch Cord,OM3 - Multimode Fiber Patch Cord
Multimode Fiber Patch Cord

FiberHal LC to LC Fiber Optic Cable, 10Gb Multimode Fiber Patch Cord,OM3 Duple..

NEW CommScope LC-LC, Duplex 10Gb Fiber Patch Cord AQUA Multimode (OM4), 1 - Multimode Fiber Patch Cord
Multimode Fiber Patch Cord

NEW CommScope LC-LC, Duplex 10Gb Fiber Patch Cord AQUA Multimode (OM4), 1 FT

Fiber Patch Cord 3 Meter LC/LC Duplex Multimode OM1 62.5/125 Fiber Cable - Multimode Fiber Patch Cord
Multimode Fiber Patch Cord

Fiber Patch Cord 3 Meter LC/LC Duplex Multimode OM1 62.5/125 Fiber Cable New

1M Leviton Fiber Optic Multimode Duplex Patch Cable Cord MT-RJ 62.5mic - Multimode Fiber Patch Cord
Multimode Fiber Patch Cord

1M Leviton Fiber Optic Multimode Duplex Patch Cable Cord MT-RJ 62.5mic 62DMJ-M01

Multimode Fiber Patch Cord: find, shop, buy, compare



Find the cheapest prices on Multimode Fiber Patch Cord from certified, secure, trusted merchants, stores, and retailers at aDealaLot.com. Compare the cheapest prices from across the internet in seconds and save time and money. Shopping the internet for the best prices has never been so easy. Comparison shop trusted, certified merchants on secure websites from across the internet, and always find the best price. Find the total price from unbiased shopping merchants and read reviews on products and merchants.



Fiber Optic Patch Cables

Multimode Fiber Patch Cord

http://www.fiberoptics4sale.com/page/FOFS/CTGY/Fiber_Optic_Patch_Cords Fiber Optic Patch Cable Types and Applications explained in plain English. More tutorials at http://www.fiberoptics4sale.com/wordpress

Tags: fiber optic patch cable,fiber optic patch cord,...