Sort by:

Price

Stores

Shopping Places

United States

Showing 1 to 10 of 899 products
HPI Racing 107824 Nitro Star G3.0 HO Engine with -

HPI Racing 107824 Nitro Star G3.0 HO Engine with Pullstart

This is the HPI Nitro Star G3.0 High Output Engine with Pull Starter. The HPI G3.0 HO engine is the high output (HO) version of the well-known HPI G3.0 engine (#101310). The new high output version is optimsed for performance and durability without compromising on run time. A finned black-coated crankcase design not only adds strength and rigidity but will also help cool the engine. HPI's WR8 Rally car (#106950) comes preinstalled with the G3.0 HO engine. Specification for G3.0 HO: Capacity :2.95cc Bore: 16.8mm Stroke 13.6mm RPM : 30000 Practical RPM: 6500~32000 Power : 2.2 ps/kw Carburettor: Composite Slide,7mm Bore Includes: G3.0 High Output Engine with Pull Starter, Carburetor, R5 Cold Glow Plug, Foam Air Filter, three Zip Ties and Instructions Requirements: Fuel: Car blend with 20-25% nitro content Track Equipment: Glow starter, fuel tubing, glow plug wrench 
HPI Nitro Star T-15 Pullstart .15 Sealed Ball Bearing Kit for RC -

HPI Nitro Star T-15 Pullstart .15 Sealed Ball Bearing Kit for RC Cars

HPI Nitro Star T-15 Pullstart .15 Sealed Bearing Set (2) 10x19x5 FastEddy Bearings offer the highest quality bearings available. Our engine bearing sets include: (1) Front (1) Rear engine bearing. We ship the bearings with 2 rubber seals. In many cases depending on your application you may want to remove one or both seals. We recommend that you look at the set you are removing to decide what seal/s to remove.To remove a rubber seal, simply slip a thin sharp knife tip or needle under the edge of the seal and lift up.You are purchasing the bearing listed above. In many cases the bearing sizes may change depending on your particular model and the date that it was manufactured as well as different hop ups you may have installed. PLEASE DOUBLE CHECK you R/C before ordering to make sure you get all the proper bearings. We try to keep the kits updated as best as we can. If you find a variation or mistake in our kits, please contact us so we can look into it.
HPI Nitro Star .18 Sealed Ball Bearing Kit for RC -

HPI Nitro Star .18 Sealed Ball Bearing Kit for RC Cars

HPI Nitro Star .18 Sealed Bearing Set (2) 10x19x5 FastEddy Bearings offer the highest quality bearings available. Our engine bearing sets include: (1) Front (1) Rear engine bearing. We ship the bearings with 2 rubber seals. In many cases depending on your application you may want to remove one or both seals. We recommend that you look at the set you are removing to decide what seal/s to remove.To remove a rubber seal, simply slip a thin sharp knife tip or needle under the edge of the seal and lift up.You are purchasing the bearing listed above. In many cases the bearing sizes may change depending on your particular model and the date that it was manufactured as well as different hop ups you may have installed. PLEASE DOUBLE CHECK you R/C before ordering to make sure you get all the proper bearings. We try to keep the kits updated as best as we can. If you find a variation or mistake in our kits, please contact us so we can look into it.
HPI Racing 101310 Slide Carb with Pull Start -

HPI Racing 101310 Slide Carb with Pull Start G3.0

This is the Nitro Star G3.0 Engine with Pullstarter supplied with the HPI Bullet ST 3.0 Monster Truck and Bullet ST 3.0 Stadium Truck.
HPI Racing 15182 Composite Rotary Carburetor, Complete, (F2/T-15L), Nitro Star T-15L, -

HPI Racing 15182 Composite Rotary Carburetor, Complete, (F2/T-15L), Nitro Star T-15L, 5.5Mm

Hobby Products International has grown considerably from its humble beginnings in Costa mesa, California in 1986 to become one the best internationally known RC companies. By coming up with innovative and creative design solutions HPI has captivated the world with items such as the savage, and Baja 5B. Offering a full line of vehicles to match anyone’s particular RC flavor, and backing them with industry leading parts support, HPI will continue to grow into the future!
HPI Racing 111600 Nitro Star F3.5 V2 Engine, 3.5Cc, Slide Carburettor, Rear Exhaust with A -

HPI Racing 111600 Nitro Star F3.5 V2 Engine, 3.5Cc, Slide Carburettor, Rear Exhaust with A Pullstart

The F3.5 V2 features a new crankcase and heat sink design with larger heat sink fins for improved cooling. This new design makes the engine 22G lighter and 4mm taller. A new pull start utilizes a one-way bearing encased in a large 14mm hex for increased durability.The F3.5 engine will give you eye-opening acceleration and crazy top speeds! The engine is started by a simple pull starter system and the two-needle carburetor allows you to fine-tune the performance for any kind of weather or fuel.One added benefit of the Nitro Star F3.5 is that it's a race-legal .21-Size engine, which means you can drop down to your local track or Club and enter in a race as soon as you open the box! On the inside, The F3.5 has true ABC construction, with a chrome-plated brass Piston and cylinder surrounded by the lightweight aluminum case.
HPI Racing 111595 Nitro Star F4.6 V2 Engine, 4.6Cc, Slide Carburettor, Rear Exhaust with A -

HPI Racing 111595 Nitro Star F4.6 V2 Engine, 4.6Cc, Slide Carburettor, Rear Exhaust with A Pullstart

The F4.6 V2 features a new crankcase and heat sink design with larger heat sink fins for improved cooling. This new design also makes the engine 37G lighter and 12mm shorter. A new pull start utilizes a one-way bearing encased in a large 14mm hex for increased durability.The F4.6 is the Powerplant responsible for the immense speeds and raw torque in the savage x 4.6, and now it's available to fit into any savage or big-block monster truck! It features all the race tuning you could ever want in a big-block monster truck engine, fantastic good looks and plenty of attitude! With 2.9 Horsepower on tap, it really is true that there's no replacement for displacement! With 8-port race tuning, you get a huge power band through the entire rev range, All the way up to 32, 000rpm! The composite 7.5mm carb is heat-resistant for consistent tuning as the engine warms up.
Hobby Products International 15105 Nitro Star G3.0 Engine with -

Hobby Products International 15105 Nitro Star G3.0 Engine with Pullstart

This is the HPI Nitro Star G3.0 Pull Start Engine. Using the latest technology and construction techniques, this amazingly fast, durable and easy to adjust engine will give you the power you need to pulverize the competition! The Nitro Star G3.0 is the standard power plant for the Firestorm 10T stadium truck, Nitro RS4 3 Drift and Nitro MT2 G3.0 vehicles. Specifications:Glow Plug: R5 (use HPI1504) Displacement: 3.01cc Bore: 16.8mm Stroke: 13.6mm Maximum Horse Power: 2.2PS(2.17hp)/ 31,000rpm Maximum RPM: 32,000rpm Head Gasket: x3 0.2mm Carburetor: F2 Composite 6.5mm NOTE:To fit this engine in a standard MT2 you will need the optional HPI86000 engine mount.
HPI 1/10 Bullet MT ST Nitro Star G3.0 SLIDE CARBURETOR & AIR FILTER -

HPI 1/10 Bullet MT ST Nitro Star G3.0 SLIDE CARBURETOR & AIR FILTER Carb

HPI 1/10 Bullet MT / ST 3.0 Nitro (Model 107004 107006)Nitro Star G3.0 Slide Valve Carburetor & Air FilterMSRP: $90.99This Product Includes:Slide Valve Carburetor (Part # 101277)Carburetor Body (No Part #)Idle Adjustment Screw (Part # 101276)Throttle Slide Drum (Part # 101272)Mid-Range Needle Valve with O-Rings (Part # 101275)Fuel Line Fitting (Part # 1473)Throttle Boot and O-Rings (Part # 101266)Main Needle (Part # 1471)Main Needle Valve Holder (Part # 1470)Fuel Line Fitting (Part # 1473)Water Resistant Air Filter Set (Part # 101831)Air Filter Foam Element (Part # 101652 Partial)Two (2) Nylon Tie Straps (Part # 100329 Partia This product is NEW in OEM Packaging and is from a New, Unused HPI 1/10 Bullet MT / ST 3.0 Nitro (Model 107004 107006)Part Numbers are for Reference Only. The parts included with this product are exclusive to what is pictured in this listing.This product is compatible with the following Model: HPI 1/10 Bullet MT / ST 3.0 Nitro (Model 107004 107006)
HPI Racing 120037 WR8 Nitro Ken Block Gymkhana Ford Fiesta St RX43 Ready to Run 1/8 4WD Rally -

HPI Racing 120037 WR8 Nitro Ken Block Gymkhana Ford Fiesta St RX43 Ready to Run 1/8 4WD Rally Car

The HPI WR8 nitro Ken block Gymkhana Ford Fiesta ST Rx43 RTR features awesome iridescent "stars and stripes" Livery on the HPI racing WR8 chassis! With the fabulous realism of the engine-powered WR8 nitro, Ken block fans have their choice of amazing scale replicas of Ken Block's feature car from the Dubai Gymkhana 8 video, and the terrakhana video, filmed in the desert of Southern Utah! Custom Hoonigan Paint featuring color-shifting stars and stripes! The first thing to grab your attention with these cars are the amazing iridescent stars and stripes that cover the officially licensed Ford Fiesta ST Rx43 body! As you watch, the color actually changes before your eyes! From purple, to gold, then finally to green - and back again! Of course, the car is covered in the official Hoonigan racing division logos, plus sponsor logos such as Toyo, Pennzoil, KB43 and more, And replica Fifteen52 wheels fitted with grippy semi-slick rubber tires for the complete Gymkhana look! Nitro power! The WR8 nitro chassis uses almost all of the same parts as the brushless Flux version, but swaps the electric motor with a nitro engine for total scale realism! With the Nitro Star G3.0 engine, you get a realistic miniature car, complete with fuel system, exhaust and starter for a real racing car experience....
Integy RC Toy Model Hop-ups T6625BLUE 6061 3pcs Clutch Conversion for HPI Nitro - Hpi Nitro Star
Hpi Nitro Star

Integy RC Toy Model Hop-ups T6625BLUE 6061 3pcs Clutch Conversion for HPI Nitro Firestorm

HPI Racing HPI1477 Nitro Star - Hpi Nitro Star
Hpi Nitro Star

HPI Racing HPI1477 Nitro Star Uniball

Integy RC Toy Model Hop-ups T6656 Billet Machined Steel Spur Gear 50T for HPI Nitro - Hpi Nitro Star
Hpi Nitro Star

Integy RC Toy Model Hop-ups T6656 Billet Machined Steel Spur Gear 50T for HPI Nitro Firestorm

GPM Racing NRS4570 HPI Nitro RS4 Aluminum Main Gear - Hpi Nitro Star
Hpi Nitro Star

GPM Racing NRS4570 HPI Nitro RS4 Aluminum Main Gear Shaft

HPI 101304 Brake Cam Shaft Set Bullet - Hpi Nitro Star
Hpi Nitro Star

HPI 101304 Brake Cam Shaft Set Bullet Nitro

HPI 107824 Nitro Star G3.0 HO Engine w/ Pull - Hpi Nitro Star
Hpi Nitro Star

HPI 107824 Nitro Star G3.0 HO Engine w/ Pull Start

HPI 1439 Cylinder Piston Set  Nitro Star S-25 - Hpi Nitro Star
Hpi Nitro Star

HPI 1439 Cylinder Piston Set Nitro Star S-25 Engine

Hpi 1436 Nitro Star Big Block Aluminum Heat Sink Head Purple - Hpi Nitro Star
Hpi Nitro Star

Hpi 1436 Nitro Star Big Block Aluminum Heat Sink Head Purple

HPI NITRO STAR PARTS #15142, 15170, 15215, 15237, 15241, 15263 & - Hpi Nitro Star
Hpi Nitro Star

HPI NITRO STAR PARTS #15142, 15170, 15215, 15237, 15241, 15263 & 15287

HPI 15141 Cylinder/Piston/Connecting Rod Set for HPI Nitro Star - Hpi Nitro Star
Hpi Nitro Star

HPI 15141 Cylinder/Piston/Connecting Rod Set for HPI Nitro Star G3.0

Hpi Nitro Star: find, shop, buy, compare



aDealaLot Search Engine is a new technology comparison shopping portal. Compare the cheapest price on any product. Online shopping is now fast, easy and free. Compare prices on Hpi Nitro Star before you make a purchase and find the store that sells your product for the best price. Comparison shop the internet for the lowest prices. Easily search thousands of stores on millions of products and save time from going to store-to-store checking prices.



HPI RACING Nitro Star S-25

Hpi Nitro Star

new starting pin / pressure spring for Nitro Star S-25 from Hpi racing hpi racing 1433

Tags: hpi racing 1433