Sort by:

Price

Stores

Shopping Places

United States

Showing 1 to 10 of 523 products
AEM 21-8129DC Cold Air Intake -

AEM 21-8129DC Cold Air Intake System

The AEM 21-8129DC Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford F150 models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the EVAP vent and crank case vent hoses. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50...
For Ford Mustang Black Coated Aluminum Air Intake System - -

For Ford Mustang Black Coated Aluminum Air Intake System - V6

A Cold Air Intake System relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horsepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows us to deliver the maximum power gains throughout the entire RPM range.Package Included:1 x Air filter1 x Air intake pipe4 x Clamps2 x Heat shields2 x Silicone coupler hoses4 x Silicone hoses/ vacuum linesAll necessary hardware includedCompatible with:11-14 Ford MustangFits Models with 3.7L V6 Engine ONLY
For 1997-2003 Ford F-150 Expedition (V8 Engine Only) 3.5 Inch Aluminum High Flow Air Intake System Polish Pipe with Air Filter -

For 1997-2003 Ford F-150 Expedition (V8 Engine Only) 3.5 Inch Aluminum High Flow Air Intake System Polish Pipe with Air Filter Red

Item Specifications:100% Brand New, Really High QualityHigh quality aluminum piping for extra performancePulls cooler denser air from inside the inner fender well to make more power and save gasComes with Intake Piping, Air Filter, Hose, Couplers, Clamps, & Brackets & Heat ShieldThe Reuse Of Sensors Some Current Brackets May Be RequiredGuaranteed added horsepower!Comes with FilterThis Item Is Intended For Off Road Use Only - No C.A.R.B StickerInstallation instructions are not includedFitments:1997-2003 Ford Expedition V8 / 1997-2003 Ford F-150 V8
For Ford F-150/Expedition Silver Coated Aluminum Air Intake Pipe+Red Filter -

For Ford F-150/Expedition Silver Coated Aluminum Air Intake Pipe+Red Filter System

A Cold Air Intake System relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horsepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows us to deliver the maximum power gains throughout the entire RPM range.Package Included:1 x Air filter1 x Air intake pipe8 x Clamps1 x Heat shields2 x Silicone coupler hosesAll hardware as shown includedCompatible with:99-03 Ford Expedition99-03 Ford F-1502004 Ford F-150 Heritage1999 Lincoln NavigatorFits Models with V8 Engine ONLY
For 1999-2004 Ford Mustang (3.8L V6 Engine Only) 3 Inch Aluminum High Flow Cold Air Intake System Black Pipe with Air Filter -

For 1999-2004 Ford Mustang (3.8L V6 Engine Only) 3 Inch Aluminum High Flow Cold Air Intake System Black Pipe with Air Filter Red

Item Specifications:100% Brand New, Really High QualityHigh quality aluminum piping for extra performancePulls cooler denser air from inside the inner fender well to make more power and save gasComes with Intake Piping, Air Filter, Hose, Couplers, Clamps, & Brackets & Heat ShieldThe Reuse Of Sensors Some Current Brackets May Be RequiredGuaranteed added horsepower!Comes with FilterThis Item Is Intended For Off Road Use Only - No C.A.R.B StickerInstallation instructions are not includedFitments:1999-2004 Ford Mustang (3.8L V6 Engine Only)
Airaid 450-326 MXP Red Cold Air Intake System with Oiled -

Airaid 450-326 MXP Red Cold Air Intake System with Oiled Filter

The AIRAID MXP Series represents the ultimate in Cold Air Induction systems. Designed for high-performance gas and diesel applications, the MXP Intakes start with a new one piece roto-molded air box that addresses all the shortcomings of the restrictive factory design. Then AIRAID adds a new air intake tube constructed of cross-linked, high-density Polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. They also frequently have a built-in velocity stack, which further promotes airflow. What this all means is a simple-to-install system that was designed using extremely sophisticated technology to increase airflow while maintaining proper air/fuel ratios, therefore eliminating the need for re-calibration once installation is complete. Just bolt it on and go! Like any other AIRAID Intake System, the MXP includes an AIRAID Premium Filter that is sized to maximize power and efficiency.
For Ford Mustang Silver Coated Aluminum Air Intake Pipe+Red Filter - -

For Ford Mustang Silver Coated Aluminum Air Intake Pipe+Red Filter - V8

A Cold Air Intake System relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horsepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows us to deliver the maximum power gains throughout the entire RPM range.Package Included:1 x Air filter1 x Air intake pipe4 x Clamps1 x Heat shield2 x Silicone coupler hoses1 x Silicone hoses/ vacuum lineAll necessary hardware includedCompatible with:11-14 Ford MustangFits Models with 5.0L V8 Engine ONLY
Performance Cold Air Intake Kit For 2005 2006 2007 2008 Ford F-150 FX4 / King Ranch/Lariat/XL/XLT Model with 5.4L V8 Engine -

Performance Cold Air Intake Kit For 2005 2006 2007 2008 Ford F-150 FX4 / King Ranch/Lariat/XL/XLT Model with 5.4L V8 Engine Red

Specifications: 1. Material: Aluminum 2. Color: Red 3. Package Dimensions: (7.09 x 11.02 x 25.59)" / (18 x 28 x 65)cm (L x W x H) 4. Weight: 12.32lbs Fitment for: 2005-2008 Ford F-150 with 5.4L V8 Engine Note: Please match your vehicle model at the left top Package Includes: 1 x Cold Air Intake Kit
AEM AEM-21-8128DC 21-8128DC Cold Air Intake -

AEM AEM-21-8128DC 21-8128DC Cold Air Intake System

The AEM 21-8128DC Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford F150 EcoBoost models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tubes are constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the intake air temperature sensor. The dual intake AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 ...
Weiand 8124 Intake manifold -

Weiand 8124 Intake manifold

Weiand Action Plus Intake Manifolds feature a dual plane design which improves manifold efficiency and delivers maximum horsepower and torque. These manifolds are designed using permanent mold casting process to provide lighter, smoother and a better look. They include exhaust crossover which enhances drivability.
For 2004 to 2008 Ford F-150 Black Coated Aluminum Air Intake System - 11 Gen V8 05 06 - Ford Aluminum Intake System
Ford Aluminum Intake System

For 2004 to 2008 Ford F-150 Black Coated Aluminum Air Intake System - 11 Gen V8 05 06 07

For 2011 to 2014 Ford Mustang Black Coated Aluminum Air Intake System - V6 12 - Ford Aluminum Intake System
Ford Aluminum Intake System

For 2011 to 2014 Ford Mustang Black Coated Aluminum Air Intake System - V6 12 13

For 2007 to 2014 Ford F-150 Black Coated Aluminum Air Intake System - 12 Gen V8 08 09 10 11 12 - Ford Aluminum Intake System
Ford Aluminum Intake System

For 2007 to 2014 Ford F-150 Black Coated Aluminum Air Intake System - 12 Gen V8 08 09 10 11 12 13

1998 1999 2000 2001 2002 2003 FORD ESCORT ZX2 2.0 2.0L ENGINE (ONLY FIT ZX2 MODEL) AIR INTAKE KIT SYSTEMS - Ford Aluminum Intake System
Ford Aluminum Intake System

1998 1999 2000 2001 2002 2003 FORD ESCORT ZX2 2.0 2.0L ENGINE (ONLY FIT ZX2 MODEL) AIR INTAKE KIT SYSTEMS (RED)

For 08-10 Ford Super Duty 6.4L V8 Wrinkle Finish Aluminum Cold Air Intake Pipe+Heat Shield - 2nd Gen - Ford Aluminum Intake System
Ford Aluminum Intake System

For 08-10 Ford Super Duty 6.4L V8 Wrinkle Finish Aluminum Cold Air Intake Pipe+Heat Shield - 2nd Gen 09

Ford Aluminum Intake System: find, shop, buy, compare



aDealaLot Search Engine will compare prices by brand name, price, popular products, merchant name and many more ways. You can read millions of consumer written reviews. Learn about products you plan to purchase, about accessories, products that are related to Ford Aluminum Intake System and many more. aDealaLot Search Engine always has up to date cheapest prices. With live data feeds, aDealaLot Search Engine keeps you informed with the latest price changes and product reviews. Never buy before you compare. aDealaLot Search Engine really will save you money!



1999 Ford F150 Aluminum Intake Manifold

Ford Aluminum Intake System

This manifold is off of a 1999 Ford F150. This will be installed on my 1998 Ford F150. This will only fit if you have PI heads. The 1999 5.4l Ford F150 was the only year that came with a full aluminum upper intake. Follow along on Social Media for more behind the scenes! https://www.instagram.com/achautomotive/ https://twitter.com/achautomotive https://www.facebook.com/achautomotive Tube Buddy: https://www.tubebuddy.com/achautomotive Tools: Milwaukee 1/2" Impact Wrench - https://amzn.to/2D...

Tags: Ford,F150,Trucks,Triton,V8,5.4l,Intake,Manifold...