Mahr Federal 4334000 1003 Millimess Mechanical Dial Comparator, ±50 μm Range, 1 μm Resolution, 8 mm Stem, Yellow
Millimess is the "classic" amongst all measuring instrument. For over 60 years the Millimess series of dial comparators has been synonymous with both high precision and extreme robustness. Both maximum accuracy and a minimal reversal span error are obtained through the levers, gears and pinions being supported with jeweled bearings and that the measuring spindle running in a ball bush guide. Millimess is therefore particularly suitable for measuring tasks where the accuracy and the reversal span of a conventional dial indicator are not sufficient. Further advantages of Millimess are the simple handling, the easy reading as well as the movement being absolute shockproof.
Mahr Federal 4308970 801 SGM MarTest Standard Version Test Indicator, 0.0001" x ± 0.004", 1.1" Dial, 0.57" Styli
Mahr Federal 801 SGM MarTest 4308970, 0.0001" x ±0.004" Standard Test Indicator, 0-4-0, 1.5" Dial Dia., 0.57" styli. Test indicators are invaluable for surface plate layout work when doing comparative measurements. Includes storage case and contact wrench.
Türlen Precision TEST DIAL INDICATOR 7 JEWELS .0005" 0-15-0
Professional Precision Tool! Easy-to-read 1-3/16" diameter face, 0.0005" graduation, 5/32" and 3/8" diameter posts with dovetail clamp, and automatic reversing. Meets federal specifications for accuracy. Has .030 travel and a hair trigger response to the lightest pressure. Features: Easy to read 1-3/16'' white face with black markings 7 JEWELS Crisp graduations Durable satin chrome finish Graduations: 0.0005'' per line Includes a padded case
Mahr Federal 2014698 AGD 2 Dial Indicator, 10.00" Range x 0.001", 28I SN, Jeweled, Lug Back, With Rev Counter
Mahr Federal AGD 2, 2014698 Dial Indicator 1.00" RANGE X .001", 28ISN Lug back, Jeweled is used to measure dimensional deviations. It has a measurement range of 0 to 1.00", graduations of 0.001", an accuracy of ±0.001", and a range per revolution of 0.100". The dial is light green to be easy on the eyes and inch recognition with a contrasting hand for readability. This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. The dial is continuous with a reading of 0-100, for direct readings.
Mahr Federal 12I AGD 1 Dial Indicator, 0.025" Range x 0.0001"
Approximate 57mm diameter with soft-yellow tint. Approximate 2.250in diameter with soft-green tint. These indicators are normally furnished with continuous dial (with R. C. ) or + on right balance dial (w/o R. C. ), lug back, .18" by .250" long contact and tolerance hands.
Mahr Federal 4302950 801 V MarTest Vertical Version Test Indicator, 0.0005" x ± 0.015", 1.1" Dial, 0.57" Styli
Mahr Federal 801 V MarTest 4302950, 0.0005" x ±0.015" Vertical Test Indicator, 0-15-0, 1.1" Dial Dia., 0.57" styli. Test indicators are invaluable for surface plate layout work when doing comparative measurements. Includes storage case and contact wrench.
Test Dial Indicator .0005" Holder Quill Bridgeport Mill with Case
-Frame features 3-point rotation with opposed pressure screw for rigid mounting. -Easy-to-read 1-3/16" diameter face, 0.0005" graduation, 5/32" and 3/8" diameter posts with dovetail clamp, and automatic reversing. Meets federal specifications for accuracy. Has .030 travel and a hair trigger response to the lightest pressure.
Measure depths in tight spots and up to 22” deep with this Super versatile tool. Precision measuring instrument used to determine the depth of any shape that has a step, groove, or slot. Features: range: 0 to 22 inch (with included 6 extension Rods 1", 2", 3", 4", 5", 6") resolution: 0.0005 inch Super high precision dial indicator - twice the accuracy of regular indicators indicator gauge conforms to AGD standard and Federal accuracy specifications indicator can be mounted on center or side of base. Base Length: 4 inch includes 10 attachments (6 extension Rods and 4 feeler points) protective case included.
Mahr Federal 4307950 801 SG Test Indicator, Plus/Minus 0.015" Range, 0.0005" Resolution, Large Dial
Testing concentricity and run-out of shafts and bores. Testing of parallelism and alignment of surfaces in engineering and tool making. The sealed unit making the working impervious to liquids, these indicators are ideal for use in a workshop environment.
Mahr Federal 4305200 800 S MarTest Standard Version Test Indicator, 0.01 mm x ± 0.4 mm, 1.1" Dial, 0.57" Styli
Mahr Federal 800 S MarTest 4305200, 0.01mm x ±0.4mm Standard Test Indicator, 0-40-0, 1.1" Dial Dia., 0.57" styli. Test indicators are invaluable for surface plate layout work when doing comparative measurements. Includes storage case and contact wrench.
Tips to find the best prices on Federal Dial Indicator. Always take into consideration specials, rebates or other savings, including shipping, handling and taxes. aDealaLot Search Engine will always search for these offers, including the total cost, and provide you with the best price. New products, merchants and services are always being added to help you save time and money. Compare prices, read reviews on products and merchants and find specials not offered anywhere else.
Federal Dial Indicator Repair
Federal Dial Indicator
Repairing an indicator I picked up on the cheap.
Tags: Federal indicator,dial indicator,lathe,indicato...