Sort by:

Price

Stores

Shopping Places

United States

Showing 1 to 10 of 57 products
uxcell 1-3/4-inch Dia 1/4-inch Shank Carbide Tipped Chamfer Router Bit 45 Degree with 7/8-inch Cutting -

uxcell 1-3/4-inch Dia 1/4-inch Shank Carbide Tipped Chamfer Router Bit 45 Degree with 7/8-inch Cutting Length

Product Name: Chamfer BitMaterial: Tungsten CarbideStandard: 1/4-inch x 7/8-inchPackage Content: 1 x Chamfer BitWeight: 83gOverall Length: 62.5mm / 2.46-inchBearing Diameter: 1/2-inchCutting Angle: 45 DegreeCutting Diameter: 44.4mm / 1-3/4-inchCutting Length: 7/8-inchShank Diameter: 1/4-inchColor: Gray,Silver ToneFlute Number: 2Tool maintenance:Keep tools clean after using them, remove resin, sawdust on the timber, using standard industrial solvent to clean the tool.Apply a small amount of oil can prevent the tool surface rust, clean up all the dirt of the shank to prevent slippage during use.Do not attempt to grind the tool or change the shape of the tool.Notice: When the tool is blunt, replace with a new tool, do not continue to use the tool in order to avoid breakage.Must use a suitable clamp(not included here). If the clamp is not round or worn, it will cause the clamp can not clamp the tool properly, please replace the clamp with standard specification immediately to prevent dangerous situation such as handle shaking, flying off or twisted off when the tool is working at high speed.
Amana Tool - 49400 Carbide Tipped Chamfer 45° x 1-1/4 Dia x 1/2 x 1/4

Amana Tool - 49400 Carbide Tipped Chamfer 45° x 1-1/4 Dia x 1/2 x 1/4" Shank

Chamfer or bevel edges for decorative effect or to form edge Miter joints. Produce crisp, uniform edges at accurate angles to make 4-, 6-, 8-, 12-, or 16-sided boxes. For best results use in a router table., #49400 diameter (D) 1-1/4, angle (a°) 45°, cutting height (B) 1/2, shank (D) 1/4, overall length (L) 2, replacement bearing 47704, flutes 2, C 5/8, 49400 carbide Tipped Chamfer 45 degree x 1-1/4 dia x 1/2 x 1/4 inch shank
LU&MN Carbide Tipped Router Bits (15 PCS) With 1/4

LU&MN Carbide Tipped Router Bits (15 PCS) With 1/4" Shank, Wood Milling Saw Cutter, All Purpose (Woodworking Tools for Home Improvement and DIY)

Professional 15 Piece 1/4" Shank Carbide Router Bit Set Milling Cutter Wood Case Tool Kit Specification: Material: YG8 Carbide Alloy+#45 Metal Shank Diameter: 1/4inch (6.35mm) Packing: wooden box Includes : 7/64" Straight BitR1/4" Cover Box Bit R1/4" Bearing Cover Box Bit 1/2" Dovetail Over Bit R1/4" Rounding Over Bit 1/4" Straight Bit 1/2" Bearing Flute Trim Bit 5/8"Straight Bit R1/8"Cover Box Bit 45 Degree Chamfer Bit 15/64" Straight Bit R3/8" Rounding Over Bit 1/2" 90 Degree "V" Grooving Bit R5/32" Roman Ogee Bit 1/2" Straight Bit Features: Strong and durable. Industrial quality router bits High abrasion resistance, high-precision grinding technologySolid hardened steel bodies with anti kickback designBuild-up & heat resistant teflon coatingCutters to slice smoothly into stock producing clean, splinter free Bearing: Totally enclosed & lubricated Applications: Suitable for solid wood, MDF, particle board, plywood, etcUsing for hand making a furniture or other woodworkingSuitable for wood flooring, wainscot paneling and shaker style panel doorsPerfect for edging, trimming, veining and grooving in all woodworking projects for both professional carpenters and hobbyists Note: Due to the difference between different monitors, the picture may not reflect...
Bosch 85298M 1-5/16 In. x 45 degree Carbide Tipped Chamfer -

Bosch 85298M 1-5/16 In. x 45 degree Carbide Tipped Chamfer Bit

Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Chamfer bit creates attractive decorative edging that gives a unique finish to the work piece. The fully hardened and tempered steel shank provides ultimate durability.
Bosch 85298MC 1-5/16 In. x 45° Carbide-Tipped Chamfer Router -

Bosch 85298MC 1-5/16 In. x 45° Carbide-Tipped Chamfer Router Bit

Bosch router bits are distinguished for their careful selection of materials, exactly calculated cutting geometry, long bit life, extra sharp cutting edges and low vibration.
V Groove Router Bit 90 Degree Double Flute Chamfer and Bevel Bit Carbide Tipped Woodworking Tool Engraving Router Bit 1/2'' Dia x 1/4 Inch -

V Groove Router Bit 90 Degree Double Flute Chamfer and Bevel Bit Carbide Tipped Woodworking Tool Engraving Router Bit 1/2'' Dia x 1/4 Inch Shank

Autoly 1/2

Autoly 1/2" Shank Diameter 1-1/2" Cutting Depth 45 Degree Carbide Tipped Chamfer Rounding Router Bit

Cutting Diameter : 67mm /2 5/8" Bearing Diameter : 12.7mm/1/2" Angle : 45 Degree Total Length : 78mm /3.1" Material : Metal Color : Silver Gray Net Weight : 206g Package Content : 1 x Chamfer Router Bit with Bearing Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
MLCS 8369 1/2-Inch shank Carbide-tipped Router Bit Set, -

MLCS 8369 1/2-Inch shank Carbide-tipped Router Bit Set, 30-Piece

High quality router bit set at an incredible price. Just $3.33 per bit. Wood storage box included. Includes bits: 3 Cove (1/4", 3/8", 1/2"), 2 Flush Trim (3/8", 1/2"), 3 Dovetail (14 deg-1/2", 5/8" & 9 deg-3/8"), 45 degree Chamfer, 2 Roman Ogee (5/32", 1/4"), 6 Round Over (1/8", 3/16", 1/4", 5/16", 3/8", 1/2"), 5 Straight (1/4", 5/16", 3/8", 1/2", 3/4"), 1 Rabbeting (3/8"), 3 Round Nose (1/4", 3/8", 1/2"),1 Bevel (25 deg), 1 Slot Cutter (1/4"), 1 V-Groove (1/2"), 1 Panel Pilot (3/8"), 1 Allen Wrench and 1 bearing to convert Round Over bit into Beading bit. 1/2" Shank.
Amana Tool - 49420 Carbide Tipped Chamfer 60° x 1-1/2 Dia x 5/8 x 1/2

Amana Tool - 49420 Carbide Tipped Chamfer 60° x 1-1/2 Dia x 5/8 x 1/2" Shank

Chamfer or bevel edges for decorative effect or to form edge Miter joints. Produce crisp, uniform edges at accurate angles to make 4-, 6-, 8-, 12-, or 16-sided boxes. For best results use in a router table., #49420 diameter (D) 1-1/2, angle (a°) 60°, cutting Height (B) 5/8, shank (D) 1/2, overall length (L) 2-5/8, B1 27/64, replacement bearing 47706, flutes 2, C 9/16, 49420 carbide Tipped Chamfer 60 degree x 1-1/2 dia x 5/8 x 1/2 inch Shank
Vermont American 23155 45-Degree Carbide Tipped Chamfer Router Bit, 1/2-Inch Ball Bearing 2-Flute 1/4-Inch -

Vermont American 23155 45-Degree Carbide Tipped Chamfer Router Bit, 1/2-Inch Ball Bearing 2-Flute 1/4-Inch Shank

2560-0958 features: -for decorative bevel edging and Concealed joints. -1/4'' Shank. -45º angle. -1/2'' Bearing. Unit material: -steel. Use material: -metal. Product type: -driver bits. Dimensions: overall product weight: -0. 26 pounds.
2402  Whiteside Carbide Tip  FlushTrim Router Bit 1/2CD 1CL w/B3 Bearing - Carbide Tipped Chamfer Bit
Carbide Tipped Chamfer Bit

2402 Whiteside Carbide Tip FlushTrim Router Bit 1/2CD 1CL w/B3 Bearing 1/4SH

1066  Whiteside Carbide Tipped  Straight Router Bit 1/2CD 1CL 1/2SH - Carbide Tipped Chamfer Bit
Carbide Tipped Chamfer Bit

1066 Whiteside Carbide Tipped Straight Router Bit 1/2CD 1CL 1/2SH 2FL

1/4
Carbide Tipped Chamfer Bit

1/4" x 1/4" Carbide Tipped 45 Degree Chamfer Router Cutter Bit Cutting Tool

1/2
Carbide Tipped Chamfer Bit

1/2" x 1-1/4" Double Flute 45-Degree Carbide Tipped Chamfer Router Bit Cutter

Magnate 0906 Chamfer 2 Flute Carbide Tipped Router Bit — 45 Degree; 7/8
Carbide Tipped Chamfer Bit

Magnate 0906 Chamfer 2 Flute Carbide Tipped Router Bit — 45 Degree; 7/8" Cutting Height; 1/2" Shank Diameter; 1-1/2" Shank Length; 1-7/8" Overall Diameter

Skil 91545 Carbide Tipped 45 Degree Chamfer Router Bit - 1/4
Carbide Tipped Chamfer Bit

Skil 91545 Carbide Tipped 45 Degree Chamfer Router Bit - 1/4" Shank (891)

NEW BOSCH 1-5/16
Carbide Tipped Chamfer Bit

NEW BOSCH 1-5/16" x 45° CHAMFER CARBIDE TIPPED ROUTER BIT 85597MC 1/2" SHANK

5/8
Carbide Tipped Chamfer Bit

5/8" HT Carbide Tipped Chamfer Bit/ Ball Bearing Guide 45 Angle 1/4" Shank*5375

OLDHAM VIPER CHAMFER CARBIDE TIPPED ROUTER BIT 2
Carbide Tipped Chamfer Bit

OLDHAM VIPER CHAMFER CARBIDE TIPPED ROUTER BIT 2" x 5/8" x 45 DEGREE MADE IN USA

NEW CRAFTSMAN 45° CHAMFER CARBIDE TIPPED ROUTER BIT - Carbide Tipped Chamfer Bit
Carbide Tipped Chamfer Bit

NEW CRAFTSMAN 45° CHAMFER CARBIDE TIPPED ROUTER BIT 9-64224

Carbide Tipped Chamfer Bit: find, shop, buy, compare



Tips to find the best prices on Carbide Tipped Chamfer Bit. Always take into consideration specials, rebates or other savings, including shipping, handling and taxes. aDealaLot Search Engine will always search for these offers, including the total cost, and provide you with the best price. New products, merchants and services are always being added to help you save time and money. Compare prices, read reviews on products and merchants and find specials not offered anywhere else.



Router Table Project: Building Ogee Raised Door Panels W/Amana Tool Pro-Series Router Bits

Carbide Tipped Chamfer Bit

Watch as we create Ogee Raised Panel Doors with this 3-pc. carbide tipped router bit set by Amana Tool, A.G.E Pro Series. http://www.toolstoday.com This 3-pc. set combines the 2-piece Stile & Rail cutters with one Horizontal Raised Panel bit with back cutter. The easy-to-use set, produced from micrograin carbide, ensures perfect cuts for creating raised panel doors. Carbide tipped 1/2" shank For material 3/4" through 7/8" NOTE: The router bit set in this video is #MD502 View the Pro Serie...

Tags: amana tool,age cutting tools,3 piece router bit...