Stanley Bostitch Premium Standard Staples, 1/4" (6mm), High Carbon Steel, Chisel Point, 5,000 Per Box (SBS191/4CPR)
Standard staples manufactured from superior quality high carbon steel wire, easy stapling performance. Sharp chisel point ensures less jamming. These staples also have 15% fewer misforms than the competition. 1/4" leg length, 210 staples per strip, 5000 staples per box.
These chisels are made by a highly respected cutting tool manufacturer in the Czech Republic and are of exceptional quality. The blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. The blade edges are ground with acute 35 degree angles to provide excellent clearance into the tight corners of dovetails. The primary bevels are ground at 25 degrees. Blades are 5 inches long and have a hollow on the back similar to those found on premier Japanese chisels. Handles are stained beech and 5 1/4 inches long, 1 1/4 inches in diameter and have 2 antique brass ferrules. Overall lengths are 10 1/4 inches. The blades take and hold an excellent edge. As with all edge tool, they'll need final honing before use.These chisels are an excellent value in a good quality tool.
OREGON 25AP076G 76 Drive Link Micro Chisel Chain, 1/4-Inch Pitch
OREGON 25AP 1/4-Inch-Pitch, Micro Chisel Chain. 25AP is the replacement chain for small saws originally equipped with 1/4-Inch-pitch chain. 1/4-Inch pitch chain, 050-Inch gauge. WARNING: OREGON 25AP chain may be capable of kickback that could result in serious injury to the saw operator or bystanders. Although these chains have features designed to reduce kickback energies, these are NOT low-kickback chains.
Value Pack of 6 Boxes Stanley Bostitch B8 Powercrown Premium 1/4" Staples (Stcrp21151/4)
From the Manufacturer B8 PowerCrown staples are crafted for ultimate drive performance and designed for use in Bostitch B8E, B8E-Value, B8HC, B8HDP, B8R, B8P (02245), B8RC-FC, B8RC-2G, B8RC, and B8RCB. As this crowned (peaked) staple top is flattened during the staple drive, it forces the staple legs outward so they are more fully supported by the stapler magazine throughout the drive. This delivers more stapling force and reduced buckling for maximum penetration. Staples are constructed from superior quality, high carbon wire to reduce buckling and jamming. The finely honed chisel points deliver maximum penetration for maximum sheet capacity with a 1/4" leg length. Product Description Legendary Bostitch B8 PowerCrown staples are crafted for ultimate drive performance. Taking the physical dynamics of staple driving into consideration led our engineers to develop the unique PowerCrown feature. As this crowned (peaked) staple top is flattened during the staple drive, it forces the staple legs outward so they are more fully supported by the stapler magazine throughout the drive. This delivers more stapling force and reduced buckling for maximum penetration. Each full strip contains 210 staples and is constructed from superior quality high carbon wire to reduce buckling and jamming. ...
Delta Power Equipment Corporation 17-001 1/4-Inch Professional Mortising Chisel and Bit Set
This .25 in. Professional Mortising Bit is designed with a 5/8 in. shank to fit Delta Products. Contains 1 Chisel and Bit Set. Size: 1/4 in. square. Bits made of high-quality steel and resist overheating in heavy use.
Excel Blades #17A Wood Chisel Blade, 1/4 Inch, American Made Replacement Hobby Blades, 5 Pack
High quality classic #17A chisel blades, 100% Made in the USA with a 1/4 inch blade perfect for chiseling, shaving, cutting, trimming wood, plastic, rubber, wax and more with ultimate precision. These versatile replacement blades fit with all standard light duty craft knives including Xacto Knife. They are perfect for light chiseling, and shapping a range of different materials with a super sharp narrow blade that allows you to make a more skillful cut than your traditional chisel blade. Includes a pack of (5) of #17A narrow chisel blades with 1.5 x 0.25 x 0.37 inch edge.
4-Piece Woodworking Square Hole Drill Bit Mortising Chisel 1/4 to 1/2 Inch Drill bit Set
Product Features This Mortising Chisel set is great for drilling square holes in wood with a mortising machine or a mortising attachment (not included). This quality set also comes with a convenient plastic storage case. Reduce labor intensity of construction workers, speed up the construction speed, reduce construction costs for construction, installation, renovation, decoration industries. Use matters: Square hole drill is mainly used for woodworking aspects Material: high-speed steel, Hardness: 56HRC Fits mortising attachments with 3/4" collars Product Description Set of 4 - 1/4-Inch(6mm), 5/16-Inch(8mm), 3/8-Inch(10mm) and 1/2-Inch(12.7mm)
Find more merchants, products and services and save more time and money! Use this free service anytime to compare prices in 0.25 Chisel and save time and money. aDealaLot uses many services throughout the internet to bring you the best prices.
Kobalt Tool Haul
This is most of the Kobalt tools I've picked up in the last month. Below you will find a link for each tool. Stay tuned for the rest of the tool haul made up of other brands.
Enjoy and Thanks for watching.
Kobalt 2-Pack 42-in W x 32-in H Steel Adjustable Saw Horse (800-lb)
Kobalt ½, ¾, 1-in Woodworking Chisels